合作
艺术
美容与健康
工艺
文化与历史
娱乐
环境
食品与饮料
逆向工程
科学
体育
技术
可穿戴设备
Sawn Wood Veneer: Thin Leaves Ripped from a Hardwood Board
Veneer is a thin leaf of wood glued over a core; three or more crossed layers make plywood. Before slicing and peeling machines, veneer was sawn by hand, about 3 mm thick. Plane the board face, gauge a line, rip off one leaf, and repeat, keeping the leaves in the order they came off.
The picture: our diagram of the board, the gauged line and the stack of leaves.
中级
A day
说明
1
1
Plane the face
Plane the face
Clamp a dry hardwood board on edge and plane its face flat and smooth.
此步骤所需材料：
硬木板1 个所需工具：
台虎钳
手刨
直尺规2
2
Gauge the leaf
Gauge the leaf
Set the gauge to about 3 mm plus the saw kerf and scribe a line from the planed face along both edges and the end.
所需工具：
划线规
卷尺3
3
Rip off the leaf
Rip off the leaf
Saw down the waste side of the line from both edges, keeping the cut square, until the leaf comes free.
所需工具：
纵割锯台虎钳4
4
Repeat and stack
Repeat and stack
Plane the board face again and saw the next leaf. Number the leaves in order and keep them flat under boards and weights.
所需工具：
手刨
平压木板（一对）
压榨用重物5
5
Leaves from a board
Leaves from a board
正在加载 Jupyter 笔记本…
相关蓝图
这些蓝图共享知识——技术、材料或原理
CC0 公共领域
此蓝图以 CC0 协议发布。你可以自由复制、修改、分发和使用此作品，无需征得许可。
通过购买蓝图中的产品支持创客，他们将获得 创客佣金 （由供应商设定），或创建此蓝图的新版本并将其作为连接包含在你自己的蓝图中以分享收入。