合作
艺术
美容与健康
工艺
文化与历史
娱乐
环境
食品与饮料
逆向工程
科学
体育
技术
可穿戴设备
Scraper: a Hand Scraper Forged from Octagon Steel (Holford, 1907)
A hand scraper takes paint and grease off boiler plate, cast iron or any other material and leaves a bright, smooth surface. Frederick Holford's 20th Century Toolsmith (1907) forges one from 5/8-inch octagon tool steel: the end is drawn perfectly flat, 1/8 inch thick, about 3 inches long and 1 inch wide, with the end left square so its corners do the cutting. It is hardened hard and no temper is drawn.
The overall length of the bar is not given; that is unknown here.
Source: F. J. Holford, The 20th Century Toolsmith and Steelworker (1907), pp. 176-177 and p. 21 (the hardening bath). Picture: his Fig. 107.
中级
An hour
说明
1
1
Read Holford
Read Holford
"A scraper for taking off paint, grease, etc., off boiler plate or any other material and leave a bright smooth surface, is chiefly made from octagon steel ... for an ordinary scraper 5/8 octagon will do."
2
2
Forge the blade flat
Forge the blade flat
Choose octagon steel to suit the width of scraper wanted; 5/8 inch does for an ordinary one. Forge the end perfectly flat, 1/8 inch thick, about 3 inches long and 1 inch wide, and leave the end perfectly square. The length of the bar left for a handle is not given (unknown).
此步骤所需材料：
工具钢八角钢1 bar所需工具：
锻炉
铁砧
铁匠锤
铁匠钳
未知尺寸3
3
Harden, no temper
Harden, no temper
Heat about 1 inch back from the scraping edges and quench in the hardening bath, then cool the whole tool. Holford's bath (p. 21) is clean water free from grease, best made a brine with as much salt as it will dissolve, large and cold. Draw no temper: the tool must be very hard.
所需工具：
锻炉铁匠钳
饱和盐水
耐热手套4
4
Grind the corners
Grind the corners
Grind the square end so its corners are very sharp: the corners are the scraping edges.
所需工具：
旋转磨石5
5
History and honest limits
History and honest limits
Holford says the scraper "will give excellent results if properly forged, hammered and hardened". The same hard, untempered scraper is the tool used to bring metal surfaces true by scraping off high spots.
The overall length of the bar is not given.
此蓝图制作
CC0 公共领域
此蓝图以 CC0 协议发布。你可以自由复制、修改、分发和使用此作品，无需征得许可。
通过购买蓝图中的产品支持创客，他们将获得 创客佣金 （由供应商设定），或创建此蓝图的新版本并将其作为连接包含在你自己的蓝图中以分享收入。