艺术
美容与健康
工艺
文化与历史
娱乐
环境
食品与饮料
逆向工程
科学
体育
技术
可穿戴设备
Sheet Metal Stamping: Blanks, Drawn Cans and Washers
Stamping turns coil into parts at press speed. The coil is uncoiled, straightened and fed into a press whose die cuts and shapes it: blanking cuts the outline, piercing punches holes, forming bends, drawing pulls a flat blank into a cup. A washer is one blank pierced in the middle. A drink can is a blank punched from stiff cold-rolled aluminium sheet (typically alloy 3104-H19 or 3004-H19), drawn into a cup about three inches across, then pushed through ironing rings that stretch and thin the wall. Its end is stamped separately from alloy 5182-H48 coil; a conversion press forms the rivet button, scores the opening and fits the tab.
高级
Seconds per part (industrial)
说明
1
1
Uncoil and straighten
Uncoil and straighten
The coil is set on an uncoiler and fed through straightening rolls into the press.
此步骤所需材料：
铝卷100 公斤
钢卷100 公斤2
2
Blank and pierce
Blank and pierce
In a progressive die each press stroke advances the strip one station: one station pierces holes, the next blanks the outline. Steel washers are made this way.
所需工具：
冲压机
级进模3
3
Draw cups
Draw cups
For cans, round blanks of aluminium are drawn into shallow cups.
所需工具：
冲压机级进模4
4
Redraw and iron
Redraw and iron
Each cup is pushed through ironing rings that lengthen and thin the wall; the base dome is formed at the same time.
所需工具：
冲压机5
5
Trim, neck and flange
Trim, neck and flange
The ragged top is trimmed and the open end necked in and flanged to take the end.
所需工具：
冲压机6
6
Stamp the ends
Stamp the ends
Shells are stamped from end-stock coil; a conversion press forms the rivet button, scores the opening and fits a tab formed from a separate strip.
所需工具：
冲压机级进模7
7
Inspect
Inspect
Parts are measured against the drawing; cans are checked for wall thickness and leaks.
所需工具：
6 英寸数显卡尺
CC0 公共领域
此蓝图以 CC0 协议发布。你可以自由复制、修改、分发和使用此作品，无需征得许可。
通过购买蓝图中的产品支持创客，他们将获得 创客佣金 （由供应商设定），或创建此蓝图的新版本并将其作为连接包含在你自己的蓝图中以分享收入。