艺术
美容与健康
工艺
文化与历史
娱乐
环境
食品与饮料
逆向工程
科学
体育
技术
可穿戴设备
Metal Bucket: Tapered Sheet Steel, Wired Rim, Bail and Lid
A bucket is a watertight vessel, a cylinder or tapered cone with an open top and a flat bottom, carried by a semicircular handle called the bail. Cut the side from steel sheet to the flat pattern of a cone, roll it, rivet and solder the seam, wire the rim, set in a bottom, hang a forged bail, and make a lid to fit.
The picture: a tapered metal well bucket with its bail.
中级
A day
说明
1
1
Mark and cut
Mark and cut
Mark the side as a ring sector (step 6) with dividers, plus a lap for the seam, and a bottom disc a little larger than the base. Cut them with snips.
此步骤所需材料：
低碳钢板2 个所需工具：
两脚规
铁皮剪2
2
Roll, rivet and solder
Roll, rivet and solder
Curve the side over the stake with a mallet until the ends lap. Drill and rivet the seam, then sweat solder into it with sal ammoniac as flux so it is watertight.
此步骤所需材料：
铁铆钉8 个
锡铅焊料0.1 公斤
氯化铵（NH₄Cl）0.01 公斤所需工具：
成型砧
木槌
手摇钻
横向楔头锤
电烙铁3
3
Wire the rim and set the bottom
Wire the rim and set the bottom
Turn the top edge over a steel wire to stiffen the rim. Turn up the edge of the bottom disc, fit it inside the base, rivet it and solder it all round.
此步骤所需材料：
钢丝1 m铁铆钉8 个锡铅焊料0.1 公斤所需工具：
成型砧木槌横向楔头锤手摇钻电烙铁4
4
Ears and bail
Ears and bail
Forge two ears from sheet offcuts with a hole each and rivet them below the rim on opposite sides. Forge an iron rod into a semicircular bail with a hook at each end through the ears.
此步骤所需材料：
熟铁圆棒0.6 m铁铆钉4 个
木炭2 as required所需工具：
铁匠炉
铁砧横向楔头锤
铁匠钳
电焊手套5
5
Lid
Lid
Cut a disc a little larger than the top and turn its edge down over the stake so it sits on the rim. Rivet on a strap handle.
此步骤所需材料：
低碳钢板1 个铁铆钉2 个所需工具：
铁皮剪成型砧木槌手摇钻6
6
The flat pattern of a tapered bucket
The flat pattern of a tapered bucket
正在加载 Jupyter 笔记本…
材料
7- 2 个占位符
- 22 个占位符
- 0.2 公斤占位符
- 0.01 公斤占位符
- 1 m占位符
- 0.6 m占位符
- 2 as required占位符
相关蓝图
这些蓝图共享知识——技术、材料或原理
CC0 公共领域
此蓝图以 CC0 协议发布。你可以自由复制、修改、分发和使用此作品，无需征得许可。
通过购买蓝图中的产品支持创客，他们将获得 创客佣金 （由供应商设定），或创建此蓝图的新版本并将其作为连接包含在你自己的蓝图中以分享收入。