合作
艺术
美容与健康
工艺
文化与历史
娱乐
环境
食品与饮料
逆向工程
科学
体育
技术
可穿戴设备
Small Wooden Wheels: Cut with a Hole Saw, Bored for the Axle
Small wheels for models and toys that run on a dowel axle. A hole saw cuts each wheel as a round disc, and its pilot drill leaves a hole at the exact centre, which is opened up so the wheel turns freely on the axle. Sizes are ours.
The picture: our drawing.
初学者
1 hour
说明
1
1
Cut the discs
Cut the discs
Clamp an 18 mm hardwood board on the drill press table over scrap and cut 50 mm discs with the hole saw at slow speed, half way from each side so the edges do not splinter.
此步骤所需材料：
硬木板1 个所需工具：
台钻
开孔器套装
安全眼镜2
2
Bore the axle hole
Bore the axle hole
Open the pilot hole with a drill a little larger than the 8 mm dowel axle, square to the face, so the wheel runs without wobble.
所需工具：
台钻
钻头套装
6 英寸数显卡尺3
3
Sand and oil
Sand and oil
Sand the rims and faces smooth, round the edges slightly, and wipe on a thin coat of linseed oil.
此步骤所需材料：
亚麻籽油20 毫升所需工具：
砂纸套装
棉抹布此蓝图制作
CC0 公共领域
此蓝图以 CC0 协议发布。你可以自由复制、修改、分发和使用此作品，无需征得许可。
通过购买蓝图中的产品支持创客，他们将获得 创客佣金 （由供应商设定），或创建此蓝图的新版本并将其作为连接包含在你自己的蓝图中以分享收入。