艺术
美容与健康
工艺
文化与历史
娱乐
环境
食品与饮料
逆向工程
科学
体育
技术
可穿戴设备
Stainless Steel Bar and Wire Rod: Blooms Hot-Rolled, Cut or Coiled
Long stainless products start as blooms. Reheat a bloom and hot-roll it stand by stand: stop at bar size and cut it into lengths as it leaves the mill, or roll on down to wire rod and coil it for drawing. Bars are then straightened and machined.
The picture: our diagram, bloom to bar and to coiled rod.
高级
Factory process
说明
1
1
Reheat the bloom
Reheat the bloom
Heat the stainless bloom above its recrystallisation temperature.
此步骤所需材料：
不锈钢大方坯1 个所需工具：
感应加热器2
2
Roll it down
Roll it down
Pass it through the roughing, intermediate and finishing stands, each making the section smaller and rounder. Reheat if it cools below the recrystallisation temperature.
所需工具：
轧机感应加热器3
3
Bar: cut to length
Bar: cut to length
For bar, stop at the bar size and cut it into lengths at the mill exit. When cold, straighten it and machine it to tolerance and finish.
所需工具：
氧乙炔切割炬
金属车床4
4
Wire rod: coil it
Wire rod: coil it
For wire rod, roll on down to about 9 mm and lay it in a coil, ready for the drawing bench.
所需工具：
轧机5
5
Rod from one bloom
Rod from one bloom
正在加载 Jupyter 笔记本…
相关蓝图
这些蓝图共享知识——技术、材料或原理
CC0 公共领域
此蓝图以 CC0 协议发布。你可以自由复制、修改、分发和使用此作品，无需征得许可。
通过购买蓝图中的产品支持创客，他们将获得 创客佣金 （由供应商设定），或创建此蓝图的新版本并将其作为连接包含在你自己的蓝图中以分享收入。