艺术
美容与健康
工艺
文化与历史
娱乐
环境
食品与饮料
逆向工程
科学
体育
技术
可穿戴设备
Frank A. Stanley · Public domain (1919)
Steel Dowel Pins: Two from One Piece, Necked, Hardened and Ground (Stanley 1919)
Die makers made their own dowel pins two at a time: one piece of steel is turned, necked in the middle, hardened, ground dead straight to size from each end, then snapped in two at the neck. Frank Stanley described the practice of one die shop.
Source: F. A. Stanley, Punches and Dies (1919), pp. 417–419. The choice of tool steel and the forge for hardening are ours; the passage gives no hardening heat. Picture: Stanley's Fig. 610, grinding dowel pins.
中级
1 day
说明
1
1
Cut stock for two pins
Cut stock for two pins
Take a length of steel a little larger than the dowel size and long enough for two pins. It must harden, so use tool steel (our choice).
此步骤所需材料：
工具钢八角钢1 length for two pins所需工具：
台虎钳2
2
Turn 0.008 in over size
Turn 0.008 in over size
Turn it on centres to about 0.008 in above the finished size.
所需工具：
金属车床
车床鸡心夹
千分尺3
3
Neck it in the middle
Neck it in the middle
Cut a neck 1/16 in deep in the middle, the dividing line between the two pins.
所需工具：
金属车床4
4
Harden
Harden
Harden the piece. This passage gives no heat; heat to hardening heat and quench in the usual way for your steel (ours).
所需工具：
铁匠炉
火钳
淬火水桶5
5
Grind each half to size
Grind each half to size
Put it on dead centres in the grinding machine and grind the diameter to size from one end to the neck. Reverse it on the centres and grind from the other end. The pins come out perfectly straight from end to end.
所需工具：
外圆磨床车床鸡心夹千分尺6
6
Break the pins apart
Break the pins apart
Break the piece apart at the neck. You have two dowel pins ground closely to standard size; ream their holes true and straight to fit.
所需工具：
台虎钳此蓝图制作
CC0 公共领域
此蓝图以 CC0 协议发布。你可以自由复制、修改、分发和使用此作品，无需征得许可。
通过购买蓝图中的产品支持创客，他们将获得 创客佣金 （由供应商设定），或创建此蓝图的新版本并将其作为连接包含在你自己的蓝图中以分享收入。