艺术
美容与健康
工艺
文化与历史
娱乐
环境
食品与饮料
逆向工程
科学
体育
技术
可穿戴设备
Stick Shuttle Cut from a Beech Strip
The shuttle carries the weft yarn through the shed of the loom. The simplest is the stick shuttle: a flat, narrow piece of hard wood with notches at the ends to hold the wound weft. Saw a thin beech strip a little longer than the cloth is wide, cut forked notches at both ends, round every edge and polish it smooth so it slides.
The picture: two stick shuttles wound with yarn.
初学者
An afternoon
说明
1
1
Cut the strip
Cut the strip
Saw and plane a straight-grained beech strip about 6 mm thick and 4 cm wide, a little longer than the cloth is wide (step 5).
此步骤所需材料：
山毛榉锯材1 个所需工具：
手锯
手刨
直尺2
2
Cut the notches
Cut the notches
Drill a hole near each end and saw from the end into it, making a forked notch that holds the yarn. Cut a shallow long slot in the middle if you like, to make the shuttle lighter.
所需工具：
手摇钻
钢丝锯（曲线锯）3
3
Round and smooth
Round and smooth
Round all the edges and points with the knife and rasp so nothing can catch the warp, then sand it smooth.
所需工具：
斯洛伊德雕刻刀
木锉（粗齿）
砂纸4
4
Wax it
Wax it
Rub in beeswax and polish so the shuttle slides through the shed.
此步骤所需材料：
蜂蜡0.01 公斤所需工具：
砂纸5
5
Shuttle length for the cloth
Shuttle length for the cloth
正在加载 Jupyter 笔记本…
此蓝图制作
CC0 公共领域
此蓝图以 CC0 协议发布。你可以自由复制、修改、分发和使用此作品，无需征得许可。
通过购买蓝图中的产品支持创客，他们将获得 创客佣金 （由供应商设定），或创建此蓝图的新版本并将其作为连接包含在你自己的蓝图中以分享收入。