合作
艺术
美容与健康
工艺
文化与历史
娱乐
环境
食品与饮料
逆向工程
科学
体育
技术
可穿戴设备
Stone Flat Chisel: the Marble Lettering Tool, Drawn Very Thin (Holford, 1907)
A flat chisel for cutting letters in marble. Frederick Holford's 20th Century Toolsmith (1907) makes marble tools like granite tools, from 7/8-inch octagon steel, but tempers them a little harder, to a very light straw. The lettering tool is drawn out very thin (his Fig. 69); because of that thinness it must be heated with great care, and the last few blows when dressing it are struck on the flat side only, at a very low heat.
He gives no edge width, length or carbon content; those are unknown here.
Source: F. J. Holford, The 20th Century Toolsmith and Steelworker (1907), p. 130, pp. 122-123 and p. 21 (the hardening bath). Picture: his Fig. 69.
中级
An hour
说明
1
1
Read Holford
Read Holford
"Lettering tools are drawn out very thin, as Fig. 69, but owing to the thinness be very careful when heating, and make sure when dressing to always strike the last few blows on the flat side only, when at a very low heat."
2
2
Draw out the edge
Draw out the edge
Forge 7/8-inch octagon steel down to a straight edge, drawn out very thin (Fig. 69). Heat with great care because of the thinness. Strike the last few blows on the flat side only, at a very low heat. Straighten the edge with a very coarse file after hammering. Edge width and length are not given (unknown).
此步骤所需材料：
工具钢八角钢1 bar所需工具：
锻炉
铁砧
铁匠锤
铁匠钳
金属锉
未知尺寸3
3
Harden and temper
Harden and temper
Heat no farther back than 1/2 inch, taking care not to overheat the thin edge. Dip at least an inch deep into the hardening bath (p. 21: clean water, best a brine with as much salt as it will dissolve, large and cold) so the temper runs back slowly, and stop it at a very light straw, the marble temper.
所需工具：
锻炉铁匠钳
饱和盐水
耐热手套4
4
History and honest limits
History and honest limits
Holford sets lettering tools apart from the tooth and plain chisels used to dress marble, which "are not drawn out so thin"; the teeth of tooth chisels are filed in after hammering (his Fig. 70).
Edge width, length and the carbon of the steel are not given; an octagonal tool steel bar stands for the 7/8-inch octagon steel.
此蓝图制作
CC0 公共领域
此蓝图以 CC0 协议发布。你可以自由复制、修改、分发和使用此作品，无需征得许可。
通过购买蓝图中的产品支持创客，他们将获得 创客佣金 （由供应商设定），或创建此蓝图的新版本并将其作为连接包含在你自己的蓝图中以分享收入。