合作
艺术
美容与健康
工艺
文化与历史
娱乐
环境
食品与饮料
逆向工程
科学
体育
技术
可穿戴设备
Stop-Out Varnish: Turpentine and Resin with Lampblack (Spon's Workshop Receipts)
The etcher's stopping-out varnish from Spon's Workshop Receipts: resin dissolved in spirits of turpentine in a warm water bath, coloured with a little lampblack, and brushed over the parts of the plate that must not bite further.
Spon rates it better than Brunswick black; it sets hard overnight and can be thinned again with turpentine.
Source: E. Spon, Workshop Receipts (first series), pp. 155-156. Picture: the book's text.
初学者
Overnight to set
说明
1
1
Dissolve the resin
Dissolve the resin
Break small pieces of resin into a phial and pour spirits of turpentine over to about twice the height of the resin. Stand the bottle in a small saucepan of water kept hot on the hob, with a cork laid lightly in its mouth, and shake it now and then.
此步骤所需材料：
松脂1 small pieces
松节油1 to twice the height of the resin所需工具：
玻璃瓶（无色透明）
高壁炖锅
水2
2
Colour with lampblack
Colour with lampblack
Pour a small portion into a small pot, add a little lampblack to give it colour, and work it well together with the camel-hair pencil so there are no lumps.
此步骤所需材料：
灯烟墨1 a little所需工具：
细毛笔3
3
Apply and set
Apply and set
Brush it over the parts to be stopped out, or over the margin of the plate; left a night it sets hard. It is dry when a finger can be laid on it without sticking. Thin it again with a little turpentine.
所需工具：
细毛笔松节油此蓝图制作
CC0 公共领域
此蓝图以 CC0 协议发布。你可以自由复制、修改、分发和使用此作品，无需征得许可。
通过购买蓝图中的产品支持创客，他们将获得 创客佣金 （由供应商设定），或创建此蓝图的新版本并将其作为连接包含在你自己的蓝图中以分享收入。