艺术
美容与健康
工艺
文化与历史
娱乐
环境
食品与饮料
绿色未来
逆向工程
School Projects
科学
体育
技术
可穿戴设备

Building a Nyckelharpa — The Swedish Keyed Fiddle
Build a nyckelharpa: a bowed Swedish fiddle played not with fingers on a fingerboard but with a row of wooden KEYS whose tangents press the string to each note. It also carries sympathetic strings that ring on their own. A serious maker build in the bowed string, the tangent keyboard and sympathetic resonance.
中级
Several hours over several sessions
说明
1
1
A fiddle with a keyboard
A fiddle with a keyboard
The nyckelharpa is a bowed Swedish fiddle, but instead of pressing the strings with your fingers you press wooden KEYS. Each key drives a little tangent against the string to make a note.
2
2
Build the soundbox
Build the soundbox
Build a long, hollow wooden body with a light soundboard on top. This box amplifies the bowed strings.
此步骤所需材料:
Baltic Birch Plywood (1/8 inch, 12x12, 10-Pack)1 个
Dry Softwood Board1 个
PVA Wood Glue1 个所需工具:
Hacksaw3
3
Fit the strings
Fit the strings
Stretch a melody string and one or two drone strings along the top, over a bridge, tuned with pegs.
此步骤所需材料:
Steel Music Wire 0.032"1 个
Tuning Pegs4 个所需工具:
Awl4
4
Add sympathetic strings
Add sympathetic strings
Under the melody string, run a set of thin strings you never touch — the SYMPATHETIC strings. Tuned to the scale, they ring on their own whenever their note is played, giving the halo of sound.
此步骤所需材料:
Steel Music Wire 0.032"1 个5
5
Build the key-box
Build the key-box
Build a box under the neck holding a row of sliding wooden keys, each carrying a small hardwood tangent.
此步骤所需材料:
Dowel Rod1 个所需工具:
Sloyd Carving Knife6
6
Set the tangents
Set the tangents
Position each key's tangent so that pressing the key from below stops the melody string at the next note of the scale — a keyboard of frets you push up into the string.
7
7
Make the bow
Make the bow
String a short springy stick with horsehair to make a bow, and rub it with pine rosin.
此步骤所需材料:
Curved Branch (Bow)1 个
Bow Hair (Horsehair)1 个8
8
Bow and key
Bow and key
Hold the harpa across your body on a strap, bow the strings with one hand, and press the keys with the other. The keys pick out the tune while the drones and sympathetic strings shimmer beneath.
9
9
Compendium — bowing through a keyboard
Compendium — bowing through a keyboard
The nyckelharpa joins two ideas. First it is a bowed instrument: drawing a rosined bow across a string sets it into steady stick-slip vibration, the same Helmholtz motion as the erhu or violin, so the note sings on as long as you bow. Second, it is stopped by a KEYBOARD rather than by fingers: each key carries a tangent, a little hard ridge that pushes against the string to shorten its speaking length to a fixed note, exactly as a fret does — the same mechanism that fingers the melody on a hurdy-gurdy, but here you bow by hand instead of turning a wheel. What gives the nyckelharpa its glittering, cathedral-like tone is a third set of strings, the SYMPATHETIC strings, stretched under the melody string and never touched: each is tuned to a note of the scale, and whenever that note sounds on the bowed string, the matching sympathetic string is shaken into vibration by resonance and rings along on its own, wrapping every note in a soft halo — the same resonance trick used by the Indian sitar and sarangi. Played in Sweden since the Middle Ages and pictured on medieval church walls, the nyckelharpa is a cousin of the hurdy-gurdy (its keyed neighbour) and of the whole bowed-string family.
材料
8- 占位符
- 占位符
- 4 个占位符
- 占位符
- 占位符
You can swap these in
Can't get one of the materials? Swap it for an equivalent — these work just as well.
- Instead of Baltic Birch Plywood (1/8 inch, 12x12, 10-Pack), try:
Bendable Plywood (Wiggle Board)
CDX Softwood Plywood
Fire-Rated Plywood - Instead of Sloyd Carving Knife, try:
Blunt Collection Knife
Gilder's Knife
Knife
Sharp Cinnamon Knife - Instead of PVA Wood Glue, try:
Polyurethane Glue - Instead of Steel Music Wire 0.032", try:
Hook-Up Wire - Assortment (Stranded)
Tie Wire
Thin Brass Wire (for cleaning spouts)
Slip Ring - 6 Wire (2A)
相关蓝图
这些蓝图共享知识——技术、材料或原理
Related blueprints
Other builds that share materials, tools, or techniques with this one.

Building a Morin Khuur — The Mongolian Horse-Head Fiddle

Building a Lyre of Ur — The Sumerian Bull Lyre

Building an Erhu — The Chinese Two-String Bowed Fiddle

Building a Hurdy-Gurdy — The Crank-Powered Wheel Fiddle

Building a Kora — The West African Harp-Lute

Building a Clay Kiln — The First Furnacecraft/ceramics-and-clay
CC0 公共领域
此蓝图以 CC0 协议发布。你可以自由复制、修改、分发和使用此作品,无需征得许可。
通过购买蓝图中的产品支持创客,他们将获得 创客佣金 (由供应商设定),或创建此蓝图的新版本并将其作为连接包含在你自己的蓝图中以分享收入。