艺术
美容与健康
工艺
文化与历史
娱乐
环境
食品与饮料
逆向工程
科学
体育
技术
可穿戴设备
Test Leads with Sheet-Metal Spring Clips: Dusinberre, 1910
George Brown Dusinberre of Cleveland patented a testing clip for electric wires in 1910, US 963,425 (filed 1909). It is two sheet-metal members with crossed, serrated jaws, hinged on integral lugs at the back with no pivot pin. A U-shaped spring inside holds the jaws shut and is kept in place by flanges turned down at the sides. The upper member carries the sleeve that takes the wire. The jaws are serrated on the front edge and both sides, so a conductor can be gripped from any side, even in the crowded spaces of a switchboard. A length of insulated wire with a clip at each end makes a test lead.
中级
1 hour
说明
1
1
Cut the blanks
Cut the blanks
Cut the two blanks from sheet metal: the upper one with the wire sleeve end and serrated jaw, the lower one with the terminal lugs and serrated jaw.
此步骤所需材料：
金属薄板1 as required所需工具：
铁皮剪2
2
Shape and pair
Shape and pair
Bend the lugs of the lower member over to form the pivot between the two members, so the shanks of the jaws cross. Turn down the side flanges.
所需工具：
钢丝钳3
3
Spring
Spring
Fit the U-shaped spring between the members, held by the turned-down flanges; it keeps the crossed jaws closed.
此步骤所需材料：
U 形夹簧1 个所需工具：
钢丝钳4
4
Make the lead
Make the lead
Secure a length of insulated wire in the sleeve of one clip and its other end in a second clip.
此步骤所需材料：
连接导线1 as required所需工具：
剥线钳钢丝钳此蓝图制作
CC0 公共领域
此蓝图以 CC0 协议发布。你可以自由复制、修改、分发和使用此作品，无需征得许可。
通过购买蓝图中的产品支持创客，他们将获得 创客佣金 （由供应商设定），或创建此蓝图的新版本并将其作为连接包含在你自己的蓝图中以分享收入。