艺术
美容与健康
工艺
文化与历史
娱乐
环境
食品与饮料
逆向工程
科学
体育
技术
可穿戴设备
Thin Brass Wire Drawn Through a Drawplate
Thin brass wire is drawn from brass rod through the holes of a drawplate one size at a time, lubricated with beeswax and annealed whenever it stiffens. The volume stays the same, so the wire grows longer as it gets thinner.
The picture: a small coil of brass wire.
中级
Half a day
说明
1
1
Ready the rod
Ready the rod
Take brass rod a little larger than the plate's largest hole, or hammer it down to that, and anneal it: heat to a dull red and quench.
此步骤所需材料：
黄铜棒0.1 m
水5 升所需工具：
铁砧
横向楔头锤
丙烷喷灯
铁匠钳
淬火水桶2
2
Taper the end
Taper the end
File the first 2 cm to a long taper so it pokes through the hole.
所需工具：
锉刀套装
台虎钳3
3
Set up the plate
Set up the plate
Clamp the drawplate in the vise, tapered side of the holes toward you, and rub beeswax on the rod.
此步骤所需材料：
蜂蜡5 克所需工具：
钢制拉丝板台虎钳4
4
Draw
Draw
Push the taper through the first hole it will not slip through, grip it with the draw tongs and pull it through in one steady pull, straight out from the plate.
所需工具：
拉丝钳钢制拉丝板
皮革工作手套5
5
Next holes, and anneal
Next holes, and anneal
Draw through each smaller hole in turn. When it gets stiff, coil it, anneal it to a dull red on a fire brick and quench.
所需工具：
丙烷喷灯
耐火砖淬火水桶6
6
Measure and coil
Measure and coil
Stop at the size you need, measured with the caliper. Anneal it once more for soft wire and coil it.
所需工具：
6 英寸数显卡尺7
7
Length from the rod
Length from the rod
正在加载 Jupyter 笔记本…
此蓝图制作
相关蓝图
这些蓝图共享知识——技术、材料或原理
CC0 公共领域
此蓝图以 CC0 协议发布。你可以自由复制、修改、分发和使用此作品，无需征得许可。
通过购买蓝图中的产品支持创客，他们将获得 创客佣金 （由供应商设定），或创建此蓝图的新版本并将其作为连接包含在你自己的蓝图中以分享收入。