
Typewriter
Fifty-odd typebars all swing toward the same point on the platen. That is the whole problem: every letter has to strike the identical spot, so if two bars are in the air at once they collide and jam in a tangle you have to pull apart by hand.
The Sholes, Glidden and Soule machine solved the mechanics and left the jamming to the keyboard layout. The arrangement we call QWERTY separates the letter pairs that occur most often in English, so consecutive strikes come from opposite sides of the basket and the bars have time to fall clear.
US Patent 79,265, "Improvement in Type-Writing Machines", granted 23 June 1868 to three inventors — Christopher Latham Sholes, Carlos Glidden and Samuel W. Soule, all of Milwaukee. The keyboard you are reading this on is a mechanical workaround for a machine none of us has ever used.
说明
Read US 79,265 and note all three inventors
Read US 79,265 and note all three inventors
The patent names Sholes, Glidden AND Soule. It is usually called the Sholes and Glidden machine after the later commercial model — the patent itself has three names on it.
所需工具:
Notebook and PencilUnderstand the single-point constraint
Understand the single-point constraint
Every typebar must strike the SAME point, because that is where the paper is presented. All the difficulty follows from this one requirement.
Build a two-bar rig before building fifty
Build a two-bar rig before building fifty
Make two pivoting arms aimed at one point. Strike them in quick succession and watch them tangle. You have just reproduced the jam, and everything else is a response to it.
此步骤所需材料:
Mild Steel Rod (6mm)1 个Cut a segment to carry the typebar pivots
Cut a segment to carry the typebar pivots
Make a curved plate — the segment — with a slot per bar, arranged so all the arcs converge. Spacing here fixes everything downstream.
此步骤所需材料:
Mild Steel Sheet1 张所需工具:
Metal FileMake the typebars identical in length and mass
Make the typebars identical in length and mass
Every bar must swing and return at the same rate. A heavy bar lingers in the strike zone and is the one that jams against its neighbour.
所需工具:
Measuring RulerSolder or braze a type slug to each bar
Solder or braze a type slug to each bar
Fix a raised, mirror-image letter at the tip. Mirrored, because it prints by direct contact — the same convention as movable type.
Fit a return spring to every bar
Fit a return spring to every bar
Each bar must fall back the instant the key is released. Sluggish return is the direct cause of jamming, so tune these before blaming the layout.
此步骤所需材料:
Compression Spring Set1 个Link keys to bars with levers, not direct pushes
Link keys to bars with levers, not direct pushes
Run a linkage from each key to its bar. The leverage ratio decides how hard the machine is to type on and how hard it strikes the paper — the same trade-off.
Mount a cylindrical platen that can rotate and travel
Mount a cylindrical platen that can rotate and travel
The paper wraps a roller which advances one line at a time and moves sideways one character per strike. The paper moves; the bars do not.
此步骤所需材料:
Hardwood Dowel Rods 1/4"1 个Add an escapement to step the carriage
Add an escapement to step the carriage
Fit a toothed rack and a pawl that releases exactly one tooth per strike. This is a clock escapement doing letter spacing — borrowed wholesale from horology.
Ink through a ribbon between slug and paper
Ink through a ribbon between slug and paper
Run an inked ribbon across the strike point. The slug never touches ink directly, so it stays clean and the letter stays sharp.
此步骤所需材料:
Writing Ink20 毫升Lay out the keys alphabetically and type a paragraph
Lay out the keys alphabetically and type a paragraph
Try an A-B-C layout first. Common pairs like TH, ER and ST sit adjacent and jam constantly — this is the experiment that produced QWERTY.
Re-map the keys to separate frequent pairs
Re-map the keys to separate frequent pairs
Move the letters of common digraphs to opposite sides of the basket and retype the same paragraph. Count the jams before and after — that number is the whole justification for QWERTY.
Check alignment by typing a full line of one letter
Check alignment by typing a full line of one letter
Type twenty M's in a row. They should sit on one baseline at even spacing; drift reveals escapement or platen faults immediately.
Compendium — a layout designed for a machine nobody uses
Compendium — a layout designed for a machine nobody uses
The patent. US 79,265, "Improvement in Type-Writing Machines", granted 23 June 1868 to C. Latham Sholes, Carlos Glidden and Samuel W. Soule of Milwaukee, Wisconsin. Sholes was a newspaper editor and printer. The machine went through many revisions before Remington began manufacturing it in 1873 as the Sholes and Glidden Type-Writer — Soule's name drops out of the popular account, though it is on the patent.
Why the jam is unavoidable. All typebars must converge on a single printing point, so the strike zone is shared. Bar A must have cleared the zone before bar B arrives, and at typing speed the interval is a fraction of a second. Return spring strength, bar mass and pivot friction all set the clearing time, but no amount of tuning removes the collision risk for two bars that start adjacent and swing along nearly the same arc.
QWERTY is a mechanical solution, and the usual story about it is too simple. The layout evolved through the 1870s in consultation with users, including telegraph operators, and it does separate many frequent English digraphs across the basket. The popular claim that it was designed "to slow typists down" is wrong — the goal was to avoid jams so typists could go FASTER without stopping to untangle bars. It is equally wrong to present it as an optimum: TH and ER are notoriously still awkward, and the layout is a compromise reached commercially, not a computed solution. Dvorak's 1936 alternative is measurably better on paper and has never displaced it, which makes QWERTY a standard example of technological lock-in.
What the machine borrowed and what it changed. The escapement stepping the carriage one character at a time is lifted from clockmaking. The mirrored raised slug is movable type reduced to one letter on a lever. What was genuinely new was the combination — a keyboard that selects a character mechanically, at speed, with the paper doing the moving. The social consequence was larger than the mechanical one: typing became one of the first office occupations widely open to women, and the machines were marketed accordingly. The last thing this patent still touches is the arrangement of the keys under your fingers, preserved for a jam that stopped being possible decades ago.
材料
5- 占位符
- 占位符
- 占位符
- 20 毫升占位符
所需工具
3- 占位符
CC0 公共领域
此蓝图以 CC0 协议发布。你可以自由复制、修改、分发和使用此作品,无需征得许可。
通过购买蓝图中的产品支持创客,他们将获得 创客佣金 (由供应商设定),或创建此蓝图的新版本并将其作为连接包含在你自己的蓝图中以分享收入。
