合作
艺术
美容与健康
工艺
文化与历史
娱乐
环境
食品与饮料
逆向工程
科学
体育
技术
可穿戴设备
Uncapping Tray: McIntyre's Uncapping Box (A B C of Bee Culture, 1910)
A big wooden uncapping box from a California honey producer: 6 ft long, tin-lined, with a screen on cross strips to catch the cappings and a tin pipe at one end where the honey drains out, and an iron pivot on a cross piece to spin each comb while uncapping.
Its length lets the cappings be forked to the far end to drain for 4 or 5 days instead of piling under the knife.
Source: J. F. McIntyre in The A B C and X Y Z of Bee Culture (1910), pp. 183-184. Picture: the book's section and view.
初学者
Unknown
说明
1
1
Build the box
Build the box
Make a box 2 ft wide, 2 ft deep and 6 ft long outside of 7/8 in lumber dressed both sides, with the bottom 2 in lower in the middle than at the sides.
此步骤所需材料：
板材1 7/8 in lumber所需工具：
手锯
锤子
铁钉2
2
Line it and fit the pipe
Line it and fit the pipe
Line the bottom with tin to keep it from leaking, and fit a tin pipe at one end for the honey to run out.
此步骤所需材料：
马口铁板1 个所需工具：
铁皮剪锤子3
3
Lay the screen
Lay the screen
Lay eleven pieces of wood 1 x 1 x 22 in across the bottom about 6 in apart and lay the screen on them, leaving room below for the honey to run to the pipe end.
此步骤所需材料：
板材11 1 x 1 x 22 in
编织筛网1 个所需工具：
手锯4
4
Narrow the top and fit the pivot
Narrow the top and fit the pivot
Nail two pieces 7/8 x 3 x 72 in on the top edges, one each side, to narrow the top to the inside length of a Langstroth hive. Fix one piece 7/8 x 3 x 22 1/4 in across the top about 14 in from one end, with an iron pivot sticking up through it 1 1/2 in high to rest the combs on.
此步骤所需材料：
板材3 two 7/8 x 3 x 72 in, one 7/8 x 3 x 22 1/4 in
铁条1 pivot 1 1/2 in high铁钉1 个所需工具：
手锯锤子5
5
Set it up and use it
Set it up and use it
Stand the box with its bottom 7 in from the floor so the honey can run into a strainer below; the top is then about 32 in high (make it shallower, or stand on a plank, for a shorter person). Set one end of a comb on the pivot, uncap one side, whirl it round and uncap the other, then stand the comb in the end of the box.
所需工具：
锤子材料
5- 3 two 7/8 x 3 x 72 in, one 7/8 x 3 x 22 1/4 in占位符
- 1 个占位符
- 1 个占位符
- 1 pivot 1 1/2 in high占位符
- 1 个占位符
此蓝图制作
CC0 公共领域
此蓝图以 CC0 协议发布。你可以自由复制、修改、分发和使用此作品，无需征得许可。
通过购买蓝图中的产品支持创客，他们将获得 创客佣金 （由供应商设定），或创建此蓝图的新版本并将其作为连接包含在你自己的蓝图中以分享收入。