合作
艺术
美容与健康
工艺
文化与历史
娱乐
环境
食品与饮料
逆向工程
科学
体育
技术
可穿戴设备
Wash Bottle: a Laboratory Wash Bottle with a Slit Valve (Boy Mechanic, 1915)
A wide-mouthed bottle with a three-tube stopper that squirts a steady stream of water for rinsing glassware and washing precipitates. Blow into one tube to pressurise it; a slit rubber valve holds the pressure, and your thumb on a relief tube starts and stops the jet at once.
Source: The Boy Mechanic, Book 2 (1915), p. 458. Unknown: sizes. Picture: the book's sketch.
初学者
Unknown
说明
1
1
Bore the stopper
Bore the stopper
Fit a stopper to a large-mouthed bottle and bore three holes through it for the tubes.
此步骤所需材料：
玻璃瓶（无色透明）1 large mouth
橡胶塞1 个所需工具：
软木塞打孔器2
2
Make the tubes
Make the tubes
Use brass or glass tubes. Bend the nozzle tube E so it reaches the bottom and points out over the side (sketch); the air tube A and relief tube D only pass through the stopper.
此步骤所需材料：
玻璃管3 个所需工具：
台式玻璃吹制喷灯3
3
Fit the slit valve
Fit the slit valve
On the lower end of air tube A fit a thick piece of rubber tubing B, stoppered at its bottom end, and cut a slit C in its side: blown air opens it, and it closes again to hold the pressure. Push the three tubes through the stopper and fit it in the bottle. To use: fill with water, blow into A, then close D with your thumb; water jets steadily from E and stops the moment the thumb lifts.
此步骤所需材料：
橡胶管1 thick, short piece所需工具：
手工刀此蓝图制作
CC0 公共领域
此蓝图以 CC0 协议发布。你可以自由复制、修改、分发和使用此作品，无需征得许可。
通过购买蓝图中的产品支持创客，他们将获得 创客佣金 （由供应商设定），或创建此蓝图的新版本并将其作为连接包含在你自己的蓝图中以分享收入。