合作
艺术
美容与健康
工艺
文化与历史
娱乐
环境
食品与饮料
逆向工程
科学
体育
技术
可穿戴设备
Wedging Table: Plaster-Topped with a Cutting Wire (Binns, 1910)
The potter's wedging table Binns taught: a strong table with a 30 by 20 in top of two-inch plank, edged to make a trough filled with plaster, and a fine brass wire stretched diagonally from a post on one side for cutting the clay.
Clay is cut on the wire and slapped down on the plaster, fifteen or twenty times, until it is even; wet the plaster if it stiffens the clay too fast.
Source: C. F. Binns, The Potter's Craft (1910), p. 79. Picture: the book's text.
初学者
Unknown
说明
1
1
Make the top
Make the top
Build a strong table whose top, about 30 by 20 in, is of two-inch plank. Nail a raised edge 2 in high firmly to the sides to form a trough.
此步骤所需材料：
木板材1 two-inch plank, about 30 x 20 in
板材1 raised edge, 2 in high
铁钉1 个所需工具：
手锯
锤子2
2
Pour the plaster
Pour the plaster
Fill the trough with plaster and let it harden.
此步骤所需材料：
熟石膏1 个所需工具：
锤子3
3
Fit the post and wire
Fit the post and wire
Fasten an upright post in the centre of one side and stretch a fine brass wire from its top to the other side of the table, making a diagonal. The worker stands on the side opposite the post.
此步骤所需材料：
未知材料1 upright post, material not given
细黄铜丝1 fine brass wire铁钉1 个所需工具：
锤子手锯材料
6- 1 two-inch plank, about 30 x 20 in占位符
- 1 raised edge, 2 in high占位符
- 2 个占位符
- 1 个占位符
- 1 upright post, material not given占位符
- 1 fine brass wire占位符
此蓝图制作
CC0 公共领域
此蓝图以 CC0 协议发布。你可以自由复制、修改、分发和使用此作品，无需征得许可。
通过购买蓝图中的产品支持创客，他们将获得 创客佣金 （由供应商设定），或创建此蓝图的新版本并将其作为连接包含在你自己的蓝图中以分享收入。