艺术
美容与健康
工艺
文化与历史
娱乐
环境
食品与饮料
逆向工程
科学
体育
技术
可穿戴设备
Wood Chisels and Gouges Forged from Tool Steel
A woodworking chisel is a flat steel blade with a bevelled edge, hardened and tempered, on a wooden handle; bevelled sides let it into tight corners. A gouge is the same with a blade curved in section, for hollowing. Forge a set of widths from tool steel, harden them, temper to a dark straw and hone them sharp.
The picture: a bevel-edge wood chisel with its ferrule and wooden handle.
高级
A day for a set
说明
1
1
Forge the blades
Forge the blades
Draw tool-steel bar out flat to each blade width, taper it slightly toward the edge and forge a square tang on the other end. For gouges, set the hot blade over a round groove of the swage block and drive it in to curve it.
此步骤所需材料：
工具钢扁钢1 个
木炭1 as required所需工具：
铁匠炉
铁砧
横向楔头锤
型砧块
铁匠钳
电焊手套
安全眼镜2
2
File and bevel
File and bevel
Anneal by cooling slowly in the ashes, then file the faces flat, file the side bevels, and file the edge bevel, leaving it a little thick.
所需工具：
金属锉3
3
Harden and temper
Harden and temper
Heat the blade evenly to a cherry red and quench it in water. Polish it bright, then heat the back gently and quench again as soon as a dark straw colour reaches the edge.
此步骤所需材料：
水10 升所需工具：
铁匠炉
淬火水桶铁匠钳电焊手套安全眼镜4
4
Handles
Handles
Turn hardwood handles, fit a brass ferrule at the front of each, drill a pilot hole and drive the tang in. Oil the handles.
此步骤所需材料：
硬木条2 个
黄铜板1 个
亚麻籽油0.05 升所需工具：
木工车床
手摇钻5
5
Hone
Hone
Flatten each back on the stone and hone the bevel until a fine burr forms, then remove it.
所需工具：
1000 目磨刀石6
6
Temper colours
Temper colours
正在加载 Jupyter 笔记本…
相关蓝图
这些蓝图共享知识——技术、材料或原理
CC0 公共领域
此蓝图以 CC0 协议发布。你可以自由复制、修改、分发和使用此作品，无需征得许可。
通过购买蓝图中的产品支持创客，他们将获得 创客佣金 （由供应商设定），或创建此蓝图的新版本并将其作为连接包含在你自己的蓝图中以分享收入。