艺术
美容与健康
工艺
文化与历史
娱乐
环境
食品与饮料
逆向工程
科学
体育
技术
可穿戴设备
Woven Glass Fibre Cloth, Style 112: Plain Weave of E-glass Yarn
Thin glass cloth is the skeleton of resin laminates. This is Type I (commercial style 112) of the US standard MIL-C-9084C (1970): a plain weave of E-glass yarn ECD 450-1/2 both ways, at least 39 by 38 yarns per inch, 0.0030–0.0050 in thick, 38 in wide. Woven, it is greige cloth; its finish must make it bond to the resin it goes into (epoxy for Class 2).
The picture: two plain-woven glass fabrics, 220 and 550 g/m², heavier than style 112 (Cjp24, Wikimedia Commons, public domain).
中级
2 days
说明
1
1
Wind the warp
Wind the warp
Warp with yarn ECD 450-1/2, at least 39 ends per inch across a width of 38 in including the selvages (about 1,480 ends; ours, from 39 × 38). Ours: a warping frame and floor loom.
此步骤所需材料：
E-glass 纱线1 as required所需工具：
整经架
落地踏板织机
橡胶手套2
2
Weave plain, 38 picks per inch
Weave plain, 38 picks per inch
Weave plain (over one, under one) with the same yarn as filling, at least 38 picks per inch (15 per cm). Ours: a boat shuttle.
所需工具：
落地踏板织机
船形梭
绕线器橡胶手套3
3
Check and finish the cloth
Check and finish the cloth
The cloth must be 0.0030–0.0050 in (0.08–0.13 mm) thick, weigh 1.94–2.18 oz per square yard (66–74 g/m²) and be 38 in wide (−0.25/+0.50 in). Its finish may be just a cleaning that removes processing oils and binders, if the cloth then bonds well to its resin, or a cleaning followed by, for example, a resin-coupling agent. The standard gives no method; the finished cloth must pass its laminate tests (Class 2 for epoxy).
所需工具：
等臂天平此蓝图制作
相关蓝图
这些蓝图共享知识——技术、材料或原理
CC0 公共领域
此蓝图以 CC0 协议发布。你可以自由复制、修改、分发和使用此作品，无需征得许可。
通过购买蓝图中的产品支持创客，他们将获得 创客佣金 （由供应商设定），或创建此蓝图的新版本并将其作为连接包含在你自己的蓝图中以分享收入。