KUNST
SCHÖNHEIT & WELLNESS
HANDWERK
KULTUR & GESCHICHTE
UNTERHALTUNG
UMFELD
ESSEN & GETRÄNKE
REVERSE ENGINEERING
WISSENSCHAFTEN
SPORT
TECHNOLOGIE
WEARABLES
Abaca Fibre: Leaf Sheaths Tuxied and Hand-Stripped
Tex

Erstellt von

Tex

14. Oktober 2026FO
6
0
0
0
0

Abaca Fibre: Leaf Sheaths Tuxied and Hand-Stripped

Abaca, Manila hemp, is the fibre in the leaf sheaths of Musa textilis, a banana relative from the Philippines; it makes Manila rope, coarse twine and strong papers. Cut the stalk after flowering, peel the outer sheath layers away (tuxying), strip the fibre by hand with a knife and dry it in the sun. The picture: pulling abaca strips under a knife at the harvest site.
Anfänger
Two days

Anweisungen

1

Cut the stalk

After the plant has flowered and before fruit forms, cut the stalk near the ground and take off the leaves.

Materialien für diesen Schritt:

Reifer Abaca-Stamm (18 bis 24 Monate alt)Reifer Abaca-Stamm (18 bis 24 Monate alt)60 kg

Benötigte Werkzeuge:

BoloBolo
LederarbeitshandschuheLederarbeitshandschuhe
2

Tuxy

Loosen the leaf sheaths one by one and peel the outer, fibre-bearing layer (the tuxy) away from the soft inner layer.

Benötigte Werkzeuge:

KüchenmesserKüchenmesser
3

Strip

Lay each tuxy on a board, press a knife down on it and pull the strip through under the blade, scraping the pulp away and leaving the fibre.

Benötigte Werkzeuge:

KüchenmesserKüchenmesser
HartholzblockHartholzblock
LederarbeitshandschuheLederarbeitshandschuhe
4

Dry and bundle

Hang the fibre on a rack in the sun until dry, then tie it in bundles and weigh it.

Benötigte Werkzeuge:

Bambus-TrockengestellBambus-Trockengestell
Schnur (Kordel)Schnur (Kordel)
BalkenwaageBalkenwaage
5

Fibre from your stalks

Jupyter-Notebook wird geladen …

Materialien

1

Benötigte Werkzeuge

7

Dieser Bauplan stellt her

Verwandte Blueprints

Diese Blueprints teilen Wissen — Techniken, Materialien oder Prinzipien

CC0 Gemeinfrei

Dieser Blueprint ist unter CC0 veröffentlicht. Sie dürfen dieses Werk für jeden Zweck frei kopieren, ändern, verbreiten und verwenden, ohne um Erlaubnis zu fragen.

Unterstützen Sie den Maker, indem Sie Produkte über seinen Blueprint kaufen, wo er eine Maker-Provision von Anbietern festgelegt, verdient. Oder erstellen Sie eine neue Iteration dieses Blueprints und verbinden Sie ihn in Ihrem eigenen Blueprint, um Einnahmen zu teilen.

Diskussion

(0)

Anmelden um an der Diskussion teilzunehmen

Kommentare werden geladen...