KUNST
SCHÖNHEIT & WELLNESS
HANDWERK
KULTUR & GESCHICHTE
UNTERHALTUNG
UMFELD
ESSEN & GETRÄNKE
REVERSE ENGINEERING
WISSENSCHAFTEN
SPORT
TECHNOLOGIE
WEARABLES
Argon: Air Led over Calcium Carbide and Calcium Chloride at 800 °C (Fischer and Ringe, Thorpe 1912)
Charlie

Erstellt von

Charlie

1. November 2026DE
0
0
0
0
0

Argon: Air Led over Calcium Carbide and Calcium Chloride at 800 °C (Fischer and Ringe, Thorpe 1912)

Air is nearly 1 % argon. Red-hot calcium carbide with a little calcium chloride swallows both the oxygen and the nitrogen; argon, which combines with nothing, passes straight through. Result: about 11 litres of argon from 7 kg of carbide in two days. It still holds traces of neon, krypton and xenon (0.25 %, mostly neon). Source: Thorpe, Dictionary of Applied Chemistry vol. 1 (1912), p. 291, after Fischer and Ringe (Ber. 41, 2017). Not given: the vessel, the air volume, and how the water and carbon dioxide are taken out. Picture drawn by Youblob.
Erfahren
2 days

Anweisungen

1

Mix the absorbent

Mix calcium carbide (90 %) with calcium chloride (10 %): 7 kg carbide takes about 0.78 kg chloride (our arithmetic). Fill a tube with it. Ours: a porcelain tube in a tube furnace.

Benötigte Werkzeuge:

CalciumcarbidCalciumcarbid
CalciumchloridCalciumchlorid
PorzellanrohrPorzellanrohr
RohrofenRohrofen
2

Drive off volatile matter

Heat the mixture under reduced pressure first, to drive off anything volatile.

Benötigte Werkzeuge:

VakuumpumpeVakuumpumpe
RohrofenRohrofen
3

Lead air over it at 800 °C

Hold the mixture at 800 °C and lead air over it slowly. The oxygen and nitrogen are taken up; what comes out is mostly argon. Ours: draw the air through with an aspirator.

Materialien für diesen Schritt:

Atmosphärische Luft - ErdeAtmosphärische Luft - Erde1 as required

Benötigte Werkzeuge:

PyrometerPyrometer
AspiratorAspirator
RohrofenRohrofen
4

Burn the traces over hot copper oxide

Lead the gas over hot copper oxide. It burns any hydrogen, hydrocarbons and carbon monoxide.

Benötigte Werkzeuge:

KupferoxidKupferoxid
PorzellanrohrPorzellanrohr
RohrofenRohrofen
5

Take out water and carbon dioxide

Remove the water vapour and carbon dioxide. Ours: soda lime for the carbon dioxide, then phosphorus pentoxide for the water.

Benötigte Werkzeuge:

Natronkalk (CO2-Absorber)Natronkalk (CO2-Absorber)
PhosphorpentoxidPhosphorpentoxid
GaswaschflascheGaswaschflasche
6

Collect the argon

Collect the gas. Expect about 11 litres in two days from 7 kg of carbide. Ours: over water in gas jars.

Benötigte Werkzeuge:

Pneumatische Wanne mit GasgläsernPneumatische Wanne mit Gasgläsern

Materialien

1

Benötigte Werkzeuge

12

Dieser Bauplan stellt her

CC0 Gemeinfrei

Dieser Blueprint ist unter CC0 veröffentlicht. Sie dürfen dieses Werk für jeden Zweck frei kopieren, ändern, verbreiten und verwenden, ohne um Erlaubnis zu fragen.

Unterstützen Sie den Maker, indem Sie Produkte über seinen Blueprint kaufen, wo er eine Maker-Provision von Anbietern festgelegt, verdient. Oder erstellen Sie eine neue Iteration dieses Blueprints und verbinden Sie ihn in Ihrem eigenen Blueprint, um Einnahmen zu teilen.

Diskussion

(0)

Anmelden um an der Diskussion teilzunehmen

Kommentare werden geladen...