KUNST
SCHÖNHEIT & WELLNESS
HANDWERK
KULTUR & GESCHICHTE
UNTERHALTUNG
UMFELD
ESSEN & GETRÄNKE
REVERSE ENGINEERING
WISSENSCHAFTEN
SPORT
TECHNOLOGIE
WEARABLES

Balsa Sheets and Sticks: Log Sawn, Dried and Planed
Dry balsa is the softest wood measured and very light, because drying leaves its cells hollow: the classic wood for light, stiff models. Green balsa is full of water, so saw the log into boards, dry them well, then rip and plane thin sheets and square sticks.
The picture: our diagram, log to stickered boards to sheets and sticks.
Fortgeschritten
Weeks of drying, then a day
Anweisungen
1
1
Saw into boards
Saw into boards
Crosscut the log to length and rip it into boards about 25 mm thick. Seal the ends.
Materialien für diesen Schritt:
Balsastamm (Ochroma pyramidale)1 StückBenötigte Werkzeuge:
Zugsäge
Längssäge
Bandmaß (Rollmeter)
Haarlineal
Hirnholzversiegelung (Paraffin)
Lederarbeitshandschuhe2
2
Air-dry
Air-dry
Stack the boards flat with stickers between every layer in a warm, airy shed and leave them until they are dry and light.
Benötigte Werkzeuge:
Stapelleiste aus Holz (Trocknungsabstandhalter)3
3
Rip and plane sheets
Rip and plane sheets
Gauge lines along the edge, rip thin sheets from the dry boards, and plane each to an even thickness.
Benötigte Werkzeuge:
Streichmaß
Längssäge
Schraubstock
Handhobel4
4
Rip sticks
Rip sticks
Rip square sticks from a sheet-thick board and plane them even.
Benötigte Werkzeuge:
Handsäge
Handhobel
Bandmaß (Rollmeter)5
5
Sheets from a board
Sheets from a board
Jupyter-Notebook wird geladen …
Materialien
1- Platzhalter
Benötigte Werkzeuge
11- Platzhalter
- Platzhalter
- 1 vendor sell this, none ship to you yetPlatzhalter
- Platzhalter
- Platzhalter
- Platzhalter
- Platzhalter
- Platzhalter
- Platzhalter
- Platzhalter
Dieser Bauplan stellt her
Verwandte Blueprints
Diese Blueprints teilen Wissen — Techniken, Materialien oder Prinzipien
CC0 Gemeinfrei
Dieser Blueprint ist unter CC0 veröffentlicht. Sie dürfen dieses Werk für jeden Zweck frei kopieren, ändern, verbreiten und verwenden, ohne um Erlaubnis zu fragen.
Unterstützen Sie den Maker, indem Sie Produkte über seinen Blueprint kaufen, wo er eine Maker-Provision von Anbietern festgelegt, verdient. Oder erstellen Sie eine neue Iteration dieses Blueprints und verbinden Sie ihn in Ihrem eigenen Blueprint, um Einnahmen zu teilen.





