KUNST
SCHÖNHEIT & WELLNESS
HANDWERK
KULTUR & GESCHICHTE
UNTERHALTUNG
UMFELD
ESSEN & GETRÄNKE
REVERSE ENGINEERING
WISSENSCHAFTEN
SPORT
TECHNOLOGIE
WEARABLES
Benzoic Acid: Sublimed from Gum Benzoin into a Paper Cone at 170 °C (Mohr, after Thorpe 1912)
Charlie

Erstellt von

Charlie

30. Oktober 2026DE
3
0
0
0
0

Benzoic Acid: Sublimed from Gum Benzoin into a Paper Cone at 170 °C (Mohr, after Thorpe 1912)

Gum benzoin, the fragrant resin of Styrax trees, holds benzoic acid that rises as a vapour when gently heated. Mohr's way lets it pass through filter paper into a paper cone, where it settles as crystals. Result: colourless crystals of benzoic acid smelling slightly of vanilla, about 4 % of the gum. Source: Thorpe, Dictionary of Applied Chemistry, vol. 1 (1912), Benzoic acid (Mohr, Annalen 29, 177). Picture drawn by Youblob.
Anfänger
4 hours

Anweisungen

1

Break the gum into small pieces

Break gum benzoin into small pieces and put them in a flat iron vessel.

Materialien für diesen Schritt:

BenzoeharzBenzoeharz100 parts by weight

Benötigte Werkzeuge:

Mörser und PistillMörser und Pistill
Gusseiserne SchaleGusseiserne Schale
2

Paste filter paper over it and tie on a paper cone

Paste filter paper over the mouth of the vessel. Over it place a large conical cap of strong paper that fits the vessel exactly, and tie it round the rim.

Benötigte Werkzeuge:

FilterpapierFilterpapier
Kraftpapierrolle (braun)Kraftpapierrolle (braun)
BaumwollschnurBaumwollschnur
3

Heat gently on a sand bath at about 170 °C

Heat gently over a sand bath at about 170 °C. The benzoic acid sublimes through the filter paper and collects as crystals inside the cone. A pound of acid takes three to four hours.

Benötigte Werkzeuge:

SandbadSandbad
ThermometerThermometer
4

Take the crystals out of the cone

At the end, remove the colourless crystals from the paper cone. The yield is about 4 % of the gum. Ours: keep them in a closed jar.

Benötigte Werkzeuge:

Glasgefäße mit DeckelGlasgefäße mit Deckel

Materialien

1
  • 100 parts by weight
    Platzhalter

Benötigte Werkzeuge

8

Dieser Bauplan stellt her

CC0 Gemeinfrei

Dieser Blueprint ist unter CC0 veröffentlicht. Sie dürfen dieses Werk für jeden Zweck frei kopieren, ändern, verbreiten und verwenden, ohne um Erlaubnis zu fragen.

Unterstützen Sie den Maker, indem Sie Produkte über seinen Blueprint kaufen, wo er eine Maker-Provision von Anbietern festgelegt, verdient. Oder erstellen Sie eine neue Iteration dieses Blueprints und verbinden Sie ihn in Ihrem eigenen Blueprint, um Einnahmen zu teilen.

Diskussion

(0)

Anmelden um an der Diskussion teilzunehmen

Kommentare werden geladen...