Zusammenarbeit
KUNST
SCHÖNHEIT & WELLNESS
HANDWERK
KULTUR & GESCHICHTE
UNTERHALTUNG
UMFELD
ESSEN & GETRÄNKE
REVERSE ENGINEERING
WISSENSCHAFTEN
SPORT
TECHNOLOGIE
WEARABLES
Bunsen Burner: Central Gas Jet, Air Holes and Mixing Tube (Roscoe & Schorlemmer, Treatise on Chemistry I, 1905)
Penny

Erstellt von

Penny

3. November 2026DK
6
0
0
0
0

Bunsen Burner: Central Gas Jet, Air Holes and Mixing Tube (Roscoe & Schorlemmer, Treatise on Chemistry I, 1905)

The laboratory gas burner. Gas from a hose comes out of a small central jet in a block on a heavy base; as it rushes up the tube above, it draws air in through holes in the block, and the mixture burns at the top with a hot, smokeless, pale blue flame of two cones. Close the holes and it burns with an ordinary yellow luminous flame. Result: a burner giving a hot non-luminous flame for laboratory heating. Source: H. E. Roscoe and C. Schorlemmer, A Treatise on Chemistry, vol. I (1905), §§ 462-463, Figs. 188-189. Unknown: materials and sizes. Picture: the book's Figs. 188-189.
Anfänger
Unknown

Anweisungen

1

Make the base, block and jet

Make a heavy round base. On it fix a block with a small central jet pointing straight up, a side nozzle for the gas hose leading into the jet, and holes through the block's sides round the jet for air. Not given: materials, sizes, the jet bore.

Materialien für diesen Schritt:

Unbekanntes MetallUnbekanntes Metall1 base, block, jet, nozzle

Benötigte Werkzeuge:

MetalldrehmaschineMetalldrehmaschine
HandbohrerHandbohrer
Unbekannte MaßeUnbekannte Maße
2

Fit the tube

Fit an upright tube on the block over the jet and the air holes, so the gas passes up it unburnt and draws in air through the holes. Not given: its length and bore.

Materialien für diesen Schritt:

Unbekanntes MetallUnbekanntes Metall1 burner tube

Benötigte Werkzeuge:

GewindeschneidsatzGewindeschneidsatz
MetalldrehmaschineMetalldrehmaschine
3

Light and use it

Push the gas hose onto the nozzle, turn on the gas and light it at the top of the tube. With the air holes open the flame is non-luminous, pale blue and much hotter, with an inner and an outer cone; with them closed it is luminous. With too much air it burns unsteadily and the inner cone turns green; more still and the flame strikes back down the tube and burns at the jet, giving off an unpleasant smell of acetylene: turn off and relight.

Benötigte Werkzeuge:

DruckluftschlauchDruckluftschlauch

Materialien

1

Benötigte Werkzeuge

5

Dieser Bauplan stellt her

CC0 Gemeinfrei

Dieser Blueprint ist unter CC0 veröffentlicht. Sie dürfen dieses Werk für jeden Zweck frei kopieren, ändern, verbreiten und verwenden, ohne um Erlaubnis zu fragen.

Unterstützen Sie den Maker, indem Sie Produkte über seinen Blueprint kaufen, wo er eine Maker-Provision von Anbietern festgelegt, verdient. Oder erstellen Sie eine neue Iteration dieses Blueprints und verbinden Sie ihn in Ihrem eigenen Blueprint, um Einnahmen zu teilen.

Diskussion

(0)

Anmelden um an der Diskussion teilzunehmen

Kommentare werden geladen...