Zusammenarbeit
KUNST
SCHÖNHEIT & WELLNESS
HANDWERK
KULTUR & GESCHICHTE
UNTERHALTUNG
UMFELD
ESSEN & GETRÄNKE
REVERSE ENGINEERING
WISSENSCHAFTEN
SPORT
TECHNOLOGIE
WEARABLES

Carbon as Pure Graphite: Coke and Sand Heated round a Coke Core in an Electric Furnace (Acheson, US 568,323)
Acheson found that carbon heated on its own hardly turns to graphite, but carbon first bound to silicon does. Coke and sand packed round a coke core form silicon carbide when the current heats the core; hotter still, the silicon boils away and the carbon is left as pure graphite, which grows outward as the core.
Result: pure carbon in its graphite form, sorted like native graphite.
Source: E. G. Acheson, US patent 568,323 (1896), pp. 1-3 and drawing (shown above). The furnace runs at hundreds of volts and up to 1000 amperes.
Erfahren
2 days
Anweisungen
1
1
Mix the charge
Mix the charge
Grind and mix powdered coke, sand, salt and sawdust thoroughly, the coke about half the weight (50 parts coke to 50 parts silica and other materials).
Materialien für diesen Schritt:
Hüttenkoks50 partsBenötigte Werkzeuge:
Sand
Natriumchlorid (Salz)
Sägemehl
Mörser und Pistill2
2
Build the furnace
Build the furnace
Build a furnace of firebrick with carbon electrodes through the two end walls. Lay a core of granular coke between the electrodes (Acheson's was 7 ft long by 4 in wide) and pack the mixture all round it.
Materialien für diesen Schritt:
Hüttenkoks1 granular, for the coreBenötigte Werkzeuge:
Schamottesteine
Grafitelektrode3
3
Run the current
Run the current
Turn on the current, at first about 650 V and 50 A. The core heats, and silicon carbide forms round it; as the heat rises further the carbide breaks up, silicon goes off as vapour and graphite is left, carrying more current. Near the end it is about 100 V and 1000 A. Stop before the graphite reaches the walls. Ours: a step-down transformer as the supply.
Benötigte Werkzeuge:
Abwärtstransformator
Grafitelektrode4
4
Take out the graphite
Take out the graphite
When cool, separate the graphite from the core and the unchanged mixture, and grade it like native graphite.
Benötigte Werkzeuge:
Mörser und PistillMaterialien
1- 1 granular, for the corePlatzhalter
Benötigte Werkzeuge
7- Platzhalter
- Platzhalter
- Platzhalter
- Platzhalter
- Platzhalter
- Platzhalter
- Platzhalter
Dieser Bauplan stellt her
CC0 Gemeinfrei
Dieser Blueprint ist unter CC0 veröffentlicht. Sie dürfen dieses Werk für jeden Zweck frei kopieren, ändern, verbreiten und verwenden, ohne um Erlaubnis zu fragen.
Unterstützen Sie den Maker, indem Sie Produkte über seinen Blueprint kaufen, wo er eine Maker-Provision von Anbietern festgelegt, verdient. Oder erstellen Sie eine neue Iteration dieses Blueprints und verbinden Sie ihn in Ihrem eigenen Blueprint, um Einnahmen zu teilen.
