KUNST
SCHÖNHEIT & WELLNESS
HANDWERK
KULTUR & GESCHICHTE
UNTERHALTUNG
UMFELD
ESSEN & GETRÄNKE
REVERSE ENGINEERING
WISSENSCHAFTEN
SPORT
TECHNOLOGIE
WEARABLES
Cotton Roving by Hand: Carded, Drawn and Lightly Twisted
Tex

Erstellt von

Tex

14. Oktober 2026FO
6
0
0
0
0

Cotton Roving by Hand: Carded, Drawn and Lightly Twisted

Roving is cotton made ready to spin: the fibres combed parallel, drawn into a long strand and given just enough twist to hold together. Mills did it with carding engines, drawing frames and roving frames; Andrew Ure (1839) explains them by the hand cards they copied. This is the hand version, from ginned lint. The picture: carding with a pair of hand cards in Ecuador.
Anfänger
An afternoon

Anweisungen

1

Load and card

Spread a thin layer of lint on one hand card. Brush the other card across it, teeth against teeth, again and again until the fibres lie parallel.

Materialien für diesen Schritt:

Entkörnte BaumwolleEntkörnte Baumwolle100 g

Benötigte Werkzeuge:

HandkardenHandkarden
2

Strip the card

Turn one card round so its teeth face the other way and draw it across: it lifts the whole layer off in one web (Ure's stripping position).

Benötigte Werkzeuge:

HandkardenHandkarden
3

Roll off a sliver

Roll the stripped web off the card into a loose, untwisted rope: a sliver. Card the rest of the lint the same way.

Benötigte Werkzeuge:

HandkardenHandkarden
4

Double, draw and add a little twist

Lay two or three slivers together and draw them out to the length of one; repeat a few times to even out thick and thin places, as the mills' drawing frames did. Draw the strand to about pencil thickness. It now pulls apart easily, so give it a little twist with a slowly turning spindle and wind it on loosely. That twist is what makes it roving.

Benötigte Werkzeuge:

HandspindelHandspindel

Materialien

1

Benötigte Werkzeuge

2

Dieser Bauplan stellt her

Verwandte Blueprints

Diese Blueprints teilen Wissen — Techniken, Materialien oder Prinzipien

CC0 Gemeinfrei

Dieser Blueprint ist unter CC0 veröffentlicht. Sie dürfen dieses Werk für jeden Zweck frei kopieren, ändern, verbreiten und verwenden, ohne um Erlaubnis zu fragen.

Unterstützen Sie den Maker, indem Sie Produkte über seinen Blueprint kaufen, wo er eine Maker-Provision von Anbietern festgelegt, verdient. Oder erstellen Sie eine neue Iteration dieses Blueprints und verbinden Sie ihn in Ihrem eigenen Blueprint, um Einnahmen zu teilen.

Diskussion

(0)

Anmelden um an der Diskussion teilzunehmen

Kommentare werden geladen...