KUNST
SCHÖNHEIT & WELLNESS
HANDWERK
KULTUR & GESCHICHTE
UNTERHALTUNG
UMFELD
ESSEN & GETRÄNKE
REVERSE ENGINEERING
WISSENSCHAFTEN
SPORT
TECHNOLOGIE
WEARABLES
Cyclohexanone from Cyclohexanol Steam-Distilled over Copper-Chromium-Barium Oxide (Winans, Wingfoot, US 2,218,457)
Charlie

Erstellt von

Charlie

31. Oktober 2026DE
1
0
0
0
0

Cyclohexanone from Cyclohexanol Steam-Distilled over Copper-Chromium-Barium Oxide (Winans, Wingfoot, US 2,218,457)

Taking two hydrogens off cyclohexanol gives cyclohexanone, the slow solvent in PVC cement. Winans carried the alcohol with steam over a hot copper-chromium-barium oxide; the catalyst lasts and is woken again with hot air. Result: 330 g cyclohexanone from 351 g cyclohexanol, 94 %. Source: Winans, US 2,218,457 (Wingfoot, 1940), Example 1. Picture drawn by Youblob.
Erfahren
1 day

Anweisungen

1

Heat the catalyst tube

Fill a tube with copper-chromium-barium oxide catalyst and hold it at about 325 C (claimed range 180-400 C).

Benötigte Werkzeuge:

Kupferchromit-KatalysatorKupferchromit-Katalysator
RohrofenRohrofen
ThermometerThermometer
2

Steam-distil the alcohol over it

Steam-distil 351 g of cyclohexanol through the tube over 4 hours.

Materialien für diesen Schritt:

CyclohexanolCyclohexanol351 g

Benötigte Werkzeuge:

DampfkesselDampfkessel
RohrofenRohrofen
BalkenwaageBalkenwaage
3

Condense and fractionate

Condense the vapours and take the cut boiling at 150-156 C: 330 g cyclohexanone, 94 %.

Benötigte Werkzeuge:

KondensatorschlangeKondensatorschlange
FraktionierbrennblaseFraktionierbrennblase
ThermometerThermometer
4

Reactivate the catalyst

When it slows, pass air over the catalyst at 450 C.

Benötigte Werkzeuge:

RohrofenRohrofen
ThermometerThermometer

Materialien

1

Benötigte Werkzeuge

7

Dieser Bauplan stellt her

Verwandte Blueprints

Diese Blueprints teilen Wissen — Techniken, Materialien oder Prinzipien

CC0 Gemeinfrei

Dieser Blueprint ist unter CC0 veröffentlicht. Sie dürfen dieses Werk für jeden Zweck frei kopieren, ändern, verbreiten und verwenden, ohne um Erlaubnis zu fragen.

Unterstützen Sie den Maker, indem Sie Produkte über seinen Blueprint kaufen, wo er eine Maker-Provision von Anbietern festgelegt, verdient. Oder erstellen Sie eine neue Iteration dieses Blueprints und verbinden Sie ihn in Ihrem eigenen Blueprint, um Einnahmen zu teilen.

Diskussion

(0)

Anmelden um an der Diskussion teilzunehmen

Kommentare werden geladen...