KUNST
SCHÖNHEIT & WELLNESS
HANDWERK
KULTUR & GESCHICHTE
UNTERHALTUNG
UMFELD
ESSEN & GETRÄNKE
GRÜNE ZUKUNFT
REVERSE ENGINEERING
WISSENSCHAFTEN
SPORT
TECHNOLOGIE
WEARABLES
Making a Sistrum — The Sacred Rattle of Ancient Egypt
Woody

Erstellt von

Woody

3. Juli 2026NO
0
0
0
0
0

Making a Sistrum — The Sacred Rattle of Ancient Egypt

Bend a frame, thread loose metal discs onto wire crossbars, and shake out the bright shimmer of the sistrum — the sacred rattle of the Egyptian goddesses Hathor and Isis. A buildable school project in the shaken idiophone: how loose discs slapping on a frame make a shivering jingle.
Anfänger
45 minutes

Anweisungen

1

Egypt's sacred shimmer

The sistrum is a rattle, but not one with seeds in a shell — its jingles are loose discs on crossbars. Priestesses of Hathor and Isis shook it in temple rites.
2

Bend the frame

Bend a green sapling into a tall U or horseshoe rising from a straight handle — the classic sistrum shape, like a narrow tennis racket.

Materialien für diesen Schritt:

Hardwood SaplingHardwood Sapling1 Stück

Benötigte Werkzeuge:

Sloyd Carving KnifeSloyd Carving Knife
3

Let it set

Tie the frame in its U-shape and let the wood dry so it holds the curve firmly on its own.
4

Drill the crossbar holes

Pierce two or three pairs of small holes through the two arms of the frame, each hole facing its partner across the gap.

Benötigte Werkzeuge:

AwlAwl
5

Cut the crossbars

Cut two or three lengths of bronze wire, each a little longer than the frame is wide.

Materialien für diesen Schritt:

Bronze WireBronze Wire1 Stück
6

Thread the jingles

Slide a few loose metal discs onto each wire so they rattle freely. Leave plenty of slack — packed tight, they cannot ring.

Materialien für diesen Schritt:

Metal Jingle DiscsMetal Jingle Discs12 Stück
7

Fit the crossbars

Push each wire through its pair of holes so it spans the frame, then bend the ends so it cannot slip out while the discs still slide.
8

Shake it

Flick your wrist to shake the sistrum. The loose discs slap against each other, the wires and the frame with a bright, shivering jingle.
9

Change the shimmer

More discs, or thinner ones, give a brighter, denser shimmer; fewer, heavier discs give a slower clash. Try different numbers on each bar.
10

Decorate it

Egyptians carved the handle as the face of the goddess Hathor and painted the frame. Decorate yours however you like to make it your own.
11

Compendium — the sacred rattle

The sistrum is a shaken idiophone, but a special one: instead of seeds in a closed shell, its jingles are loose discs or rings threaded on crossbars, so they slap freely against the bars, the frame and each other. Each disc is a tiny cymbal ringing briefly at its own high pitch, and because many of them strike at slightly different instants the sound is a bright, shivering shimmer rather than a single click — the same reason a tambourine's jingles or a cluster of sleigh bells sound sizzly rather than clean. Thinner, smaller discs ring higher and brighter, and more of them make a denser shimmer. In Egypt the sistrum was sacred: shaken by priestesses in the rites of Hathor and Isis, its rattle was believed to please the gods and drive off chaos, and the handle was often carved as Hathor's face. The earliest sistra were simple bent wood or reed frames strung with beads and seeds — the kind you have just built — before bronze frames with metal loops became the temple standard. As an idiophone it is a cousin of the shaken gourd rattle and the struck bone clappers: three different ways to make rhythm from the ring of a rigid body.

Materialien

3

Benötigte Werkzeuge

2

You can swap these in

Can't get one of the materials? Swap it for an equivalent — these work just as well.

Verwandte Blueprints

Diese Blueprints teilen Wissen — Techniken, Materialien oder Prinzipien

CC0 Gemeinfrei

Dieser Blueprint ist unter CC0 veröffentlicht. Sie dürfen dieses Werk für jeden Zweck frei kopieren, ändern, verbreiten und verwenden, ohne um Erlaubnis zu fragen.

Unterstützen Sie den Maker, indem Sie Produkte über seinen Blueprint kaufen, wo er eine Maker-Provision von Anbietern festgelegt, verdient. Oder erstellen Sie eine neue Iteration dieses Blueprints und verbinden Sie ihn in Ihrem eigenen Blueprint, um Einnahmen zu teilen.

Diskussion

(0)

Anmelden um an der Diskussion teilzunehmen

Kommentare werden geladen...