KUNST
SCHÖNHEIT & WELLNESS
HANDWERK
KULTUR & GESCHICHTE
UNTERHALTUNG
UMFELD
ESSEN & GETRÄNKE
REVERSE ENGINEERING
WISSENSCHAFTEN
SPORT
TECHNOLOGIE
WEARABLES

Gummed Paper Labels: Paper Backed with Gum Arabic, Moistened to Stick
Before self-adhesive labels, labels and stamps were gummed: the back is coated with a water-soluble gum such as gum arabic, left to dry, and moistened when the label is put on. Coat a sheet of paper, dry it flat, and cut it into labels.
The picture: our diagram, coating to cut labels.
Anfänger
An afternoon, plus drying
Anweisungen
1
1
Make the gum
Make the gum
Soak gum arabic in about twice its weight of warm water until dissolved, warm it gently in a double boiler and strain out bits.
Materialien für diesen Schritt:
Gummiarabikum50 g
Wasser0.1 LiterBenötigte Werkzeuge:
Rührschüsselsatz
Wasserbad-Topf
Feinsieb2
2
Coat the back
Coat the back
Brush a thin, even coat on the back of the paper sheet. Let it dry and give it a second thin coat.
Materialien für diesen Schritt:
Papier2 BlätterBenötigte Werkzeuge:
Leimpinsel
Trockengestell3
3
Dry flat
Dry flat
When the gum is dry to the touch, put the sheet between flat boards under a light weight so it does not curl.
Benötigte Werkzeuge:
Flache Pressbretter (Paar)
Pressgewichte4
4
Cut the labels
Cut the labels
Write or print on the front, then cut the sheet into labels. To fix one, moisten the gummed side and press it on.
Benötigte Werkzeuge:
Bastelmesser
LinealBenötigte Werkzeuge
9- Platzhalter
- Platzhalter
- Platzhalter
- Platzhalter
- Platzhalter
- Platzhalter
- Platzhalter
- Platzhalter
- Platzhalter
Dieser Bauplan stellt her
Verwandte Blueprints
Diese Blueprints teilen Wissen — Techniken, Materialien oder Prinzipien
CC0 Gemeinfrei
Dieser Blueprint ist unter CC0 veröffentlicht. Sie dürfen dieses Werk für jeden Zweck frei kopieren, ändern, verbreiten und verwenden, ohne um Erlaubnis zu fragen.
Unterstützen Sie den Maker, indem Sie Produkte über seinen Blueprint kaufen, wo er eine Maker-Provision von Anbietern festgelegt, verdient. Oder erstellen Sie eine neue Iteration dieses Blueprints und verbinden Sie ihn in Ihrem eigenen Blueprint, um Einnahmen zu teilen.


