KUNST
SCHÖNHEIT & WELLNESS
HANDWERK
KULTUR & GESCHICHTE
UNTERHALTUNG
UMFELD
ESSEN & GETRÄNKE
REVERSE ENGINEERING
WISSENSCHAFTEN
SPORT
TECHNOLOGIE
WEARABLES
Laminated Spruce Blank: Planed Spruce Boards Glued Grain-Parallel and Clamped
Woody

Erstellt von

Woody

17. Oktober 2026NO
7
0
0
0
0

Laminated Spruce Blank: Planed Spruce Boards Glued Grain-Parallel and Clamped

A laminated blank is several thin boards glued face to face with their grain running the same way: small pieces make one large member, and defects in one layer matter less. Saw and dry spruce boards, plane them smooth, glue them up and clamp them tight. The picture: our diagram, spruce layers glued and clamped.
Fortgeschritten
Weeks of drying, then two days

Anweisungen

1

Saw and dry

Saw the spruce log into boards about 12 mm thick, seal the ends and air-dry them under stickers until the meter reads 8 to 14 % moisture.

Materialien für diesen Schritt:

Fichtenstamm (Picea abies)Fichtenstamm (Picea abies)1 Stück

Benötigte Werkzeuge:

ZugsägeZugsäge
LängssägeLängssäge
Hirnholzversiegelung (Paraffin)Hirnholzversiegelung (Paraffin)
Stapelleiste aus Holz (Trocknungsabstandhalter)Stapelleiste aus Holz (Trocknungsabstandhalter)
FeuchtemessgerätFeuchtemessgerät
2

Plane

Plane both faces of each board flat and smooth for gluing; check with a straightedge.

Benötigte Werkzeuge:

HandhobelHandhobel
SchraubstockSchraubstock
HaarlinealHaarlineal
Bandmaß (Rollmeter)Bandmaß (Rollmeter)
3

Glue up

Warm the glue in a double boiler, brush it on the faces, and stack the boards with the grain all running lengthwise.

Materialien für diesen Schritt:

TierleimTierleim0.3 kg

Benötigte Werkzeuge:

Wasserbad-TopfWasserbad-Topf
LeimpinselLeimpinsel
WasserWasser
4

Clamp

Clamp the stack tight every 15 cm or so and leave it a day. Plane the faces and edges true.

Benötigte Werkzeuge:

Schraubzwinge mit SchiebebügelSchraubzwinge mit Schiebebügel
HandhobelHandhobel
5

Layers for your blank

Jupyter-Notebook wird geladen …

Materialien

2

Benötigte Werkzeuge

13

CC0 Gemeinfrei

Dieser Blueprint ist unter CC0 veröffentlicht. Sie dürfen dieses Werk für jeden Zweck frei kopieren, ändern, verbreiten und verwenden, ohne um Erlaubnis zu fragen.

Unterstützen Sie den Maker, indem Sie Produkte über seinen Blueprint kaufen, wo er eine Maker-Provision von Anbietern festgelegt, verdient. Oder erstellen Sie eine neue Iteration dieses Blueprints und verbinden Sie ihn in Ihrem eigenen Blueprint, um Einnahmen zu teilen.

Diskussion

(0)

Anmelden um an der Diskussion teilzunehmen

Kommentare werden geladen...