KUNST
SCHÖNHEIT & WELLNESS
HANDWERK
KULTUR & GESCHICHTE
UNTERHALTUNG
UMFELD
ESSEN & GETRÄNKE
REVERSE ENGINEERING
WISSENSCHAFTEN
SPORT
TECHNOLOGIE
WEARABLES

Leather Work Apron, Cut and Saddle-Stitched
A smith's or carpenter's apron is a single hide panel from chest to below the knee that turns sparks, hot scale and slipping tools. Cut it from thick vegetable-tanned leather, rivet on a neck strap and waist ties with a buckle, and stitch on a pocket.
The picture: smiths in their leather aprons outside a blacksmith's shop at Murgon, Queensland, about 1913 (State Library of Queensland).
Anfänger
An afternoon
Anweisungen
1
1
Mark and cut
Mark and cut
Mark the apron on the hide with chalk: a rectangle with the top corners cut away in curves for the arms. Cut it with a sharp knife against a ruler.
Materialien für diesen Schritt:
Pflanzlich gegerbtes Leder1 StückBenötigte Werkzeuge:
Schneiderkreide
Cuttermesser
Lineal2
2
Cut a pocket from an offcut, punch stitching holes with the awl round three sides, and saddle-stitch it on with two needles and waxed linen thread.
Materialien für diesen Schritt:
Gewachster Leinenzwirn3 mBenötigte Werkzeuge:
Ahle
Nähnadel3
3
Straps and buckle
Straps and buckle
Punch holes and rivet a neck strap to the top corners and a waist strap at each side, one with a brass buckle, the other with holes for its tongue.
Materialien für diesen Schritt:
Lederriemen3 Stück
Messingschnalle mit Dorn1 Stück
Eisennieten8 StückBenötigte Werkzeuge:
Lederlocheisen
Kreuzschlaghammer4
4
Finish
Finish
Rub the edges smooth and give the leather a light coat of oil.
Materialien für diesen Schritt:
Leinöl0.05 Liter5
5
Sizing the bib apron
Sizing the bib apron
Jupyter-Notebook wird geladen …
Materialien
6- 1 StückPlatzhalter
- Platzhalter
- 3 StückPlatzhalter
- 1 StückPlatzhalter
- 8 StückPlatzhalter
- 0.05 LiterPlatzhalter
Dieser Bauplan stellt her
Verwandte Blueprints
Diese Blueprints teilen Wissen — Techniken, Materialien oder Prinzipien
CC0 Gemeinfrei
Dieser Blueprint ist unter CC0 veröffentlicht. Sie dürfen dieses Werk für jeden Zweck frei kopieren, ändern, verbreiten und verwenden, ohne um Erlaubnis zu fragen.
Unterstützen Sie den Maker, indem Sie Produkte über seinen Blueprint kaufen, wo er eine Maker-Provision von Anbietern festgelegt, verdient. Oder erstellen Sie eine neue Iteration dieses Blueprints und verbinden Sie ihn in Ihrem eigenen Blueprint, um Einnahmen zu teilen.


