KUNST
SCHÖNHEIT & WELLNESS
HANDWERK
KULTUR & GESCHICHTE
UNTERHALTUNG
UMFELD
ESSEN & GETRÄNKE
REVERSE ENGINEERING
WISSENSCHAFTEN
SPORT
TECHNOLOGIE
WEARABLES
Petroleum Coke: Crude Oil Residue Coked in a Delayed Coker and Calcined
Charlie

Erstellt von

Charlie

17. Oktober 2026DE
5
0
0
0
0

Petroleum Coke: Crude Oil Residue Coked in a Delayed Coker and Calcined

Petroleum coke is the solid carbon left from the heaviest part of crude oil. A refinery distils crude oil, then distils the residue again under vacuum, heats what is still left to about 480–505 °C and lets it crack in a coke drum. The drum fills with green coke in 12 to 24 hours; it is cut out with a water jet and calcined in a rotary kiln. Calcined coke feeds synthetic graphite and carbon anodes. The picture: our diagram of the route from crude oil to calcined coke.
Erfahren
A day per coke drum

Anweisungen

1

Distil the crude oil

Distil crude oil in an atmospheric column, slightly above atmospheric pressure. Draw off the lighter cuts, among them naphtha (boiling between about 30 and 200 °C), and keep the residue from the bottom, which boils above 370–380 °C.

Materialien für diesen Schritt:

RohölRohöl1 t

Benötigte Werkzeuge:

Atmosphärische DestillationskolonneAtmosphärische Destillationskolonne
2

Distil the residue under vacuum

Distil that residue again at 10–40 mmHg absolute so it stays below 370–380 °C. The heavy bottoms left are the vacuum residue.

Benötigte Werkzeuge:

VakuumdestillationskolonneVakuumdestillationskolonne
VakuumpumpeVakuumpumpe
3

Heat and fill the coke drum

Pump the vacuum residue through the coker furnace to about 480–505 °C, with steam in the tubes, into a coke drum. It cracks there: gas oil and lighter parts leave as vapour and coke builds up in the drum, which fills in 12 to 24 hours.

Benötigte Werkzeuge:

Delayed CokerDelayed Coker
WasserWasser
4

Quench and cut out

Switch the feed to the second drum. Steam out the full drum, fill it with water, wait several hours and drain it. Cut the coke out with a high-pressure water jet. This is green coke.

Benötigte Werkzeuge:

Delayed CokerDelayed Coker
WasserWasser
5

Calcine

Calcine the green coke in a rotary kiln at about 1300 °C to drive off the remaining volatile hydrocarbons.

Benötigte Werkzeuge:

DrehrohrofenDrehrohrofen
6

Coke from a tonne of residue

Jupyter-Notebook wird geladen …

Materialien

1
  • Platzhalter

Benötigte Werkzeuge

6

Dieser Bauplan stellt her

CC0 Gemeinfrei

Dieser Blueprint ist unter CC0 veröffentlicht. Sie dürfen dieses Werk für jeden Zweck frei kopieren, ändern, verbreiten und verwenden, ohne um Erlaubnis zu fragen.

Unterstützen Sie den Maker, indem Sie Produkte über seinen Blueprint kaufen, wo er eine Maker-Provision von Anbietern festgelegt, verdient. Oder erstellen Sie eine neue Iteration dieses Blueprints und verbinden Sie ihn in Ihrem eigenen Blueprint, um Einnahmen zu teilen.

Diskussion

(0)

Anmelden um an der Diskussion teilzunehmen

Kommentare werden geladen...