KUNST
SCHÖNHEIT & WELLNESS
HANDWERK
KULTUR & GESCHICHTE
UNTERHALTUNG
UMFELD
ESSEN & GETRÄNKE
REVERSE ENGINEERING
WISSENSCHAFTEN
SPORT
TECHNOLOGIE
WEARABLES

Pins in Eighteen Operations: Adam Smith's Pin Factory
In 1776 Adam Smith opened The Wealth of Nations with a pin workshop. One untrained worker, he wrote, "could scarce, perhaps, with his utmost industry, make one pin in a day, and certainly could not make twenty". Split into about eighteen distinct operations, ten men in a poorly equipped workshop made about twelve pounds of pins a day, at upwards of four thousand middling pins to the pound: over 48,000 pins, or 4,800 per worker. The operations are the blueprint: draw the wire, straighten, cut, point, grind the top, make and fix the head, whiten, and paper. Pins were long made of brass before steel took over, so here the wire is drawn from brass.
Fortgeschritten
Workshop process
Anweisungen
1
1
Draw out the wire
Draw out the wire
Draw the brass down through the holes of the drawplate to pin thickness.
Materialien für diesen Schritt:
Messingstange1 as requiredBenötigte Werkzeuge:
Zieheisen aus Stahl2
2
Straighten and cut
Straighten and cut
Straighten the wire, then cut it into pin lengths.
Benötigte Werkzeuge:
Seitenschneider3
3
Point
Point
Point one end of each length.
4
4
Prepare the top and head it
Prepare the top and head it
Grind the other end to receive the head. Making the head takes two or three separate operations, and putting it on is a trade of its own.
Benötigte Werkzeuge:
Schleifstein als Rad5
5
Whiten and paper
Whiten and paper
Whiten the pins, then put them into the paper, which Smith calls "a trade by itself".
Materialien
1- 1 as requiredPlatzhalter
Benötigte Werkzeuge
3- Platzhalter
- Platzhalter
- Platzhalter
Dieser Bauplan stellt her
Verwandte Blueprints
Diese Blueprints teilen Wissen — Techniken, Materialien oder Prinzipien
CC0 Gemeinfrei
Dieser Blueprint ist unter CC0 veröffentlicht. Sie dürfen dieses Werk für jeden Zweck frei kopieren, ändern, verbreiten und verwenden, ohne um Erlaubnis zu fragen.
Unterstützen Sie den Maker, indem Sie Produkte über seinen Blueprint kaufen, wo er eine Maker-Provision von Anbietern festgelegt, verdient. Oder erstellen Sie eine neue Iteration dieses Blueprints und verbinden Sie ihn in Ihrem eigenen Blueprint, um Einnahmen zu teilen.



