KUNST
SCHÖNHEIT & WELLNESS
HANDWERK
KULTUR & GESCHICHTE
UNTERHALTUNG
UMFELD
ESSEN & GETRÄNKE
REVERSE ENGINEERING
WISSENSCHAFTEN
SPORT
TECHNOLOGIE
WEARABLES
Planetary Stand Mixer
YourGrandma

Erstellt von

YourGrandma

22. September 2026IS
47
0
0
0
0

Planetary Stand Mixer

The rotary egg beater already published spins two blades on fixed axes - so the cook must keep moving it, and a stiff dough stalls it. Herbert Johnston, an engineer at Hobart, watched a baker turning dough with a spoon and built the next rung: the beater turns on its own axis while a carrier walks it round the bowl, so the blade sweeps everywhere without the bowl or the beater being moved by hand. **US 1,264,128**, "Mixing-machine", Johnston and Rataiczak, assigned to Hobart Manufacturing, filed 1. March 1915, granted 23. April 1918. Hobart's big bakery machines came first; the domestic KitchenAid followed in 1919. **You build the motion, not the appliance**: a planetary gear set with a pen for a blade, drawing its own path on paper, and a coverage measurement against a fixed-axis beater.
Fortgeschritten
3 hours

Anweisungen

1

Read the gear set

Count the teeth on the ring and on one planet. Measure the ring's inside diameter and a planet's outside diameter with the caliper; the pitch radii are close to half of each.

Benötigte Werkzeuge:

Digitaler Messschieber 6 ZollDigitaler Messschieber 6 Zoll
Planetengetriebesatz (Stahl)Planetengetriebesatz (Stahl)
2

Mount it over paper

Screw the ring gear flat to a plywood board. Tape graph paper under it, centred. Fit one planet so it rolls inside the ring.

Materialien für diesen Schritt:

SperrholzplatteSperrholzplatte1 Stück
MillimeterpapierMillimeterpapier1 Blatt

Benötigte Werkzeuge:

HandsägeHandsäge
AkkubohrschrauberAkkubohrschrauber
MalerkreppMalerkrepp
3

Give the planet a blade

Glue a short dowel upright in a hole in the planet, four-fifths of the way out from its centre, and tape a marker to it so the tip just touches the paper.

Materialien für diesen Schritt:

HolzdübelstangeHolzdübelstange1 Stück

Benötigte Werkzeuge:

HeißklebepistoleHeißklebepistole
PermanentmarkerPermanentmarker
4

Walk it round

Push the planet slowly round the inside of the ring, letting it roll rather than slide, until the drawn pattern closes on itself. Then draw, for comparison, the circle the same blade makes when the planet is held in one place and simply spun.

Benötigte Werkzeuge:

LinealLineal
5

The same in dough

Optional but convincing: put 200 g of flour and 120 ml of water in a bowl and stir with a fixed-axis beater without moving it. Note the untouched ring of dry flour at the wall - the reason for the carrier.

Materialien für diesen Schritt:

WeizenmehlWeizenmehl200 g

Benötigte Werkzeuge:

Große Rührschüssel aus GlasGroße Rührschüssel aus Glas
Digitale KüchenwaageDigitale Küchenwaage
6

Path, coverage and gear ratio

Jupyter-Notebook wird geladen …
7

History & Context

**What the patent specifies:** a mixing machine in which the beater rotates about its own axis while being carried bodily around the bowl. **Modern build (derived):** a planetary gear set and a pen, which draws the path the blade takes. The 20-gallon Hobart was standard in large bakeries by 1915; the domestic version arrived in 1919 and the layout has not changed since. Its limits: the gearbox must take dough loads, the bowl must match the beater's reach, and a blade that reaches the wall will also scrape a bowl that is out of true.
Schritt 7 - Image 1

Materialien

4

Benötigte Werkzeuge

10

Verwandte Blueprints

Diese Blueprints teilen Wissen — Techniken, Materialien oder Prinzipien

CC0 Gemeinfrei

Dieser Blueprint ist unter CC0 veröffentlicht. Sie dürfen dieses Werk für jeden Zweck frei kopieren, ändern, verbreiten und verwenden, ohne um Erlaubnis zu fragen.

Unterstützen Sie den Maker, indem Sie Produkte über seinen Blueprint kaufen, wo er eine Maker-Provision von Anbietern festgelegt, verdient. Oder erstellen Sie eine neue Iteration dieses Blueprints und verbinden Sie ihn in Ihrem eigenen Blueprint, um Einnahmen zu teilen.

Diskussion

(0)

Anmelden um an der Diskussion teilzunehmen

Kommentare werden geladen...