KUNST
SCHÖNHEIT & WELLNESS
HANDWERK
KULTUR & GESCHICHTE
UNTERHALTUNG
UMFELD
ESSEN & GETRÄNKE
GRÜNE ZUKUNFT
REVERSE ENGINEERING
WISSENSCHAFTEN
SPORT
TECHNOLOGIE
WEARABLES
Making a Simple Skin Cloak — Fur and Hide Body Covering
The skin cloak is the earliest known form of tailored clothing, preceding woven garments by tens of thousands of years. Analysis of clothing lice genetics suggests humans began wearing animal skins at least 170,000 years ago. The simplest cloak is a single large hide (deer, elk, bison, bear) draped over the shoulders and secured with a bone pin or tied at the throat. More advanced cloaks join multiple smaller hides together with sinew-sewn seams. Fur-on cloaks provide superior insulation: the hollow hairs of deer and elk trap air, creating an insulating layer. The key to a functional skin cloak is soft, flexible tanning (brain tanning or smoke tanning) so the garment drapes and moves with the wearer rather than standing stiff like rawhide.
Fortgeschritten
4-6 hours
Anweisungen
1
1
Select a Large Brain-Tanned or Smoked Hide
Select a Large Brain-Tanned or Smoked Hide
Choose a brain-tanned or smoke-tanned hide for your cloak. A single deer hide provides roughly one body-sized piece. For a larger cloak, plan to join 2 to 3 smaller hides. The hide must be fully softened — stiff or partially tanned hides will not drape properly and will restrict movement.
Materialien für diesen Schritt:
Brain-Tanned Hide2 Stück2
2
Orient the Fur Side Outward
Orient the Fur Side Outward
If using a fur-on hide, orient the fur to face outward. The fur side sheds rain and snow while the smooth skin side sits against the body or an inner layer. Fur-out is the standard orientation for weather protection — the guard hairs channel water away rather than trapping it against the wearer.
3
3
Lay the Hide Flat and Trim the Edges
Lay the Hide Flat and Trim the Edges
Spread the hide on a flat surface and trim the edges into a roughly rectangular or semi-circular shape using a sharp flint blade. Remove any irregular projections from the leg and neck areas. A semi-circular shape drapes most naturally over the shoulders and hangs evenly.
4
4
Create a Gathered Neckline for a Single-Hide Cloak
Create a Gathered Neckline for a Single-Hide Cloak
For a single-hide cloak, fold the top edge over 3 to 4 cm and punch holes along the fold using a bone awl, spaced approximately 3 cm apart. These holes will carry a drawstring cord to gather the cloak around the neck and shoulders.
Benötigte Werkzeuge:
Bone Awl5
5
Thread a Neck Cord Through the Holes
Thread a Neck Cord Through the Holes
Thread a rawhide cord or twisted sinew through the punched holes to create a gathered neckline. Pull both ends of the cord out at the front centre so the cloak can be cinched tight or loosened. The gathering distributes the hide's weight evenly across the shoulders.
Materialien für diesen Schritt:
Sinew Thread1 Stück6
6
For a Multi-Hide Cloak: Overlap the Joining Edges
For a Multi-Hide Cloak: Overlap the Joining Edges
If joining two or more hides, overlap the edges by 2 to 3 cm along the seam line. Align the hides so the grain direction matches and the fur nap runs the same way. Clamp or weight the overlapping edges in place on a flat surface.
7
7
Punch Matching Holes Along Both Edges
Punch Matching Holes Along Both Edges
Using a bone awl, punch matching holes along both overlapping edges, spaced 1 to 2 cm apart. Push the awl through both layers simultaneously to ensure the holes align perfectly. Consistent spacing produces a straight, even seam.
Benötigte Werkzeuge:
Bone Awl8
8
Sew the Hides Together with Sinew
Sew the Hides Together with Sinew
Thread sinew through a bone needle and sew the hides together using a simple whip stitch — passing the needle through each pair of aligned holes from one side. Sinew thread swells slightly when damp, which tightens the stitches and makes the seam more weatherproof over time.
Materialien für diesen Schritt:
Sinew Thread1 Stück9
9
Seal the Seam Against Wind
Seal the Seam Against Wind
Run a thin line of warm pine pitch or rendered tallow along the seam on the inner (skin) side. Press the sealant into the stitch holes with a fingertip. This blocks wind penetration through the needle holes and adds a small amount of waterproofing to the joint.
10
10
Fit the Cloak to the Wearer
Fit the Cloak to the Wearer
Try the cloak on. It should drape from the shoulders to at least mid-thigh, with enough width to wrap around the torso. Check that the neckline gathers snugly without choking and that the arms can move freely. Trim any excess length at the bottom if needed.
11
11
Attach a Bone Toggle or Thorn Pin at the Throat
Attach a Bone Toggle or Thorn Pin at the Throat
Fasten a bone toggle, carved bone pin, or large thorn at the throat to hold the cloak closed. A toggle passes through a loop of cord on the opposite edge. A bone pin pierces both overlapping edges at the front. The closure must hold the cloak in place during movement but release easily when pulled.
Materialien
2- 2 StückPlatzhalter
- 2 StückPlatzhalter
Materialien verbundener Blueprints
Verwandte Blueprints
Diese Blueprints teilen Wissen — Techniken, Materialien oder Prinzipien
CC0 Gemeinfrei
Dieser Blueprint ist unter CC0 veröffentlicht. Sie dürfen dieses Werk für jeden Zweck frei kopieren, ändern, verbreiten und verwenden, ohne um Erlaubnis zu fragen.
Unterstützen Sie den Maker, indem Sie Produkte über seinen Blueprint kaufen, wo er eine Maker-Provision von Anbietern festgelegt, verdient. Oder erstellen Sie eine neue Iteration dieses Blueprints und verbinden Sie ihn in Ihrem eigenen Blueprint, um Einnahmen zu teilen.