KUNST
SCHÖNHEIT & WELLNESS
HANDWERK
KULTUR & GESCHICHTE
UNTERHALTUNG
UMFELD
ESSEN & GETRÄNKE
REVERSE ENGINEERING
WISSENSCHAFTEN
SPORT
TECHNOLOGIE
WEARABLES
Strontium Ferrite Disc Magnet: 1 : 10 Strontium to Iron Oxide, 1280 °C (Went, Philips 1956, Ex. 26)
Charlie

Erstellt von

Charlie

28. Oktober 2026DE
0
0
0
0
0

Strontium Ferrite Disc Magnet: 1 : 10 Strontium to Iron Oxide, 1280 °C (Went, Philips 1956, Ex. 26)

A strontium ferrite with much more iron oxide: 0.1 mol strontium carbonate to 1 mol, made as in Example 25 but passed through a 1280 °C furnace in 10 minutes. Went's rod held 1,200 gauss with a coercive force of 3,610 oersted. Source: J. J. Went, G. W. van Oosterhout and E. W. Gorter (Philips), US 2,762,777 (1956), Example 26. They sintered rods; discs and the magnetising are ours. Picture: ferrite magnets, Omegatron, Wikimedia Commons, CC BY-SA 3.0.
Erfahren
2 days

Anweisungen

1

Weigh strontium carbonate and iron oxide

Weigh 14.76 g strontium carbonate (0.1 mol) and 159.7 g ferric oxide (1 mol).

Materialien für diesen Schritt:

StrontiumcarbonatStrontiumcarbonat14.76 g
Eisen(III)-oxidEisen(III)-oxid159.7 g

Benötigte Werkzeuge:

BalkenwaageBalkenwaage
P100-AtemschutzmaskeP100-Atemschutzmaske
2

Mill, presinter and mill as in Example 25

As in Example 25: grind with alcohol 7 hours, dry at 110 °C, fire in air at 1000 °C for 4 hours, grind again and dry.

Benötigte Werkzeuge:

EisenkugelmühleEisenkugelmühle
Ethanol in Laborqualität, 95 %Ethanol in Laborqualität, 95 %
TrockenofenTrockenofen
MuffelofenMuffelofen
Tiegel mit Deckel (Porzellan)Tiegel mit Deckel (Porzellan)
TiegelzangeTiegelzange
3

Press at 1.5 t/cm²

Press at 1.5 tonnes per cm² (ours: discs).

Benötigte Werkzeuge:

Hydraulische PresseHydraulische Presse
Scheiben-PressformScheiben-Pressform
4

Pass through a 1280 °C zone in 10 minutes

Sinter at 1280 °C by passing the pieces through a 10 cm hot zone at 10 mm per minute: 10 minutes in the heat.

Benötigte Werkzeuge:

RohrofenRohrofen
Hitzebeständige HandschuheHitzebeständige Handschuhe
5

Magnetise the discs

The patent gives no magnetising method. Ours: lay a disc with its faces against the poles of a strong electromagnet, switch the current on, then off. Find which face is north with a compass.

Benötigte Werkzeuge:

ElektromagnetElektromagnet
KompassKompass

Materialien

2

Benötigte Werkzeuge

14

Dieser Bauplan stellt her

CC0 Gemeinfrei

Dieser Blueprint ist unter CC0 veröffentlicht. Sie dürfen dieses Werk für jeden Zweck frei kopieren, ändern, verbreiten und verwenden, ohne um Erlaubnis zu fragen.

Unterstützen Sie den Maker, indem Sie Produkte über seinen Blueprint kaufen, wo er eine Maker-Provision von Anbietern festgelegt, verdient. Oder erstellen Sie eine neue Iteration dieses Blueprints und verbinden Sie ihn in Ihrem eigenen Blueprint, um Einnahmen zu teilen.

Diskussion

(0)

Anmelden um an der Diskussion teilzunehmen

Kommentare werden geladen...