KUNST
SCHÖNHEIT & WELLNESS
HANDWERK
KULTUR & GESCHICHTE
UNTERHALTUNG
UMFELD
ESSEN & GETRÄNKE
REVERSE ENGINEERING
WISSENSCHAFTEN
SPORT
TECHNOLOGIE
WEARABLES
The Guarded Orange Knife: A Guard That Sets the Cut to the Peel, a Nut-Pick at the Other End
Peeling an orange with a knife cuts into the fruit and lets the juice run, and prising the peel off takes the fingernails.
Harry M. Hamrick of Philadelphia received US 461,914, dated 27 October 1891, for "a simple implement especially designed for cutting the peel of oranges, and adapted, also, for use as a nut-pick, and also to the removal of the peel from oranges after the same has been cut": a handle with a blade at one end, preferably with two cutting edges, beside a convex shield that regulates the depth of the cut to the thickness of the peel, and at the other end a pick curved at its outer end to go between the cut peel and the fruit, or to pick nuts.
This rung works out the peel's share and the depth to set, then files the blade and guard, fits a pick at the other end, and peels oranges and picks walnuts.
Fortgeschritten
About 3 hours
Anweisungen
1
1
The peel's depth
The peel's depth
Jupyter-Notebook wird geladen …
2
2
The nut-pick before it
The nut-pick before it
The embedded blueprint makes a one-piece nut pick. Hamrick puts a curved pick on the end of an orange knife, for the peel or for nuts.
3
3
Read US 461,914
Read US 461,914
"The object of my invention is the production of a simple implement especially designed for cutting the peel of oranges, and adapted, also, for use as a nut-pick, and also to the removal of the peel from oranges after the same has been cut; and the invention consists, essentially, in providing a blade which preferably should have two cutting-edges with a shield or guard, so as to regulate the depth of the cut"
"The nut-pick or peel-remover, as will be seen from the drawings, is preferably curved at its outer end, as it can thus be more easily inserted between the cut sections of the peel of the orange when used for that purpose, while at the same time it is thus better adapted for use as a nut-pick."
4
4
Make the knife and peel an orange
Make the knife and peel an orange
**Handle.** Turn or rasp a 12 cm hardwood handle and drill both ends.
**Guard.** File a small disc of stainless steel sheet with a convex outer face, drill it in the middle, and fit it on one end of the handle as B.
**Blade.** Cut a short blade from stainless steel sheet, sharpen both edges and the point, and set it through the guard into the handle so its tip stands about 5 mm past the guard's face.
**Pick.** File a 5 mm stainless rod to a point, curve its last centimetre, and set it in the other end.
**Test.** Score an orange's peel in six segments, the guard riding on the peel, and lift the sections off with the pick. Check whether any cut reached the fruit. Crack walnuts and pick out their meat.
Materialien für diesen Schritt:
Hartholzstiel-Rohling1 Stück
Edelstahlblech1 Stück
Rundstahl (Baustahl)0.1 Meter
Zweikomponentenepoxid1 Stück
Orange2 Stück
Walnuss4 StückBenötigte Werkzeuge:
Raspel
Akkubohrschrauber
Bohrersatz
Blechschere
Feilen (Handfeile)
Schleifstein
Schraubstock
Rundzange
Digitaler Messschieber 6 Zoll
Lederarbeitshandschuhe5
5
A knife that cuts too deep, too shallow or slips
A knife that cuts too deep, too shallow or slips
Guarded orange knife troubleshooting.
Flow
Loading...
6
6
History and honest limits
History and honest limits
**Harry M. Hamrick** of Philadelphia, Pennsylvania, filed US 461,914 on 9 March 1891; it is dated 27 October 1891. His drawing shows the handle A, the guard B convex on its outer face, the knife C and the nut-pick and peel-remover D. His claims cover the handle, guard, knife and pick combined, and the handle, knife and guard.
**Honest limits.** A hand-filed stainless blade and pick in a hardwood handle stand in for his made implement. The notebook treats the orange as a sphere with even peel; its values are examples. Your peeled oranges are the result.
Materialien
6- 1 StückPlatzhalter
- 1 StückPlatzhalter
- 0.1 MeterPlatzhalter
- 1 StückPlatzhalter
- 2 StückPlatzhalter
- 4 StückPlatzhalter
Benötigte Werkzeuge
10- Platzhalter
- 1 vendor sell this, none ship to you yetPlatzhalter
- Platzhalter
- Platzhalter
- Platzhalter
- Platzhalter
- Platzhalter
- Platzhalter
- Platzhalter
- Platzhalter
Verwandte Blueprints
Diese Blueprints teilen Wissen — Techniken, Materialien oder Prinzipien
CC0 Gemeinfrei
Dieser Blueprint ist unter CC0 veröffentlicht. Sie dürfen dieses Werk für jeden Zweck frei kopieren, ändern, verbreiten und verwenden, ohne um Erlaubnis zu fragen.
Unterstützen Sie den Maker, indem Sie Produkte über seinen Blueprint kaufen, wo er eine Maker-Provision von Anbietern festgelegt, verdient. Oder erstellen Sie eine neue Iteration dieses Blueprints und verbinden Sie ihn in Ihrem eigenen Blueprint, um Einnahmen zu teilen.