KUNST
SCHÖNHEIT & WELLNESS
HANDWERK
KULTUR & GESCHICHTE
UNTERHALTUNG
UMFELD
ESSEN & GETRÄNKE
REVERSE ENGINEERING
WISSENSCHAFTEN
SPORT
TECHNOLOGIE
WEARABLES
The Loop-Measure Glove Stretcher: A Measuring Loop Kept in the Handle
Tex

Erstellt von

Tex

30. September 2026FO
34
0
0
0
0

The Loop-Measure Glove Stretcher: A Measuring Loop Kept in the Handle

A glove seller fitting a customer needed a stretcher to open the glove and a separate measure to know which size to open. Moses Greensfelder of Harrisburg, Pennsylvania, received US 181,671, dated 29 August 1876, for "the combination of a hand-measure with a glove-stretcher, the measure being so arranged within the handle of the stretcher as to be capable of being drawn out for use, and is caused to regain its position in the handle by means of a suitable spring." The loop is put "around the widest part of the hand, when the index will stand at the number on the scale representing the size required." This rung works out what the loop reads round hands of different shapes, then builds a tube handle with a spring-returned leather loop and an index, and measures several hands.
Fortgeschritten
About 3 hours

Anweisungen

1

Loop reading round the hand

Jupyter-Notebook wird geladen …
2

The stretcher it measures for

The embedded blueprint makes a hollow stretcher. Greensfelder puts the measure inside the stretcher's handle, so one tool sizes and stretches.
3

Read US 181,671

"A is the jaw of an ordinary glove-stretcher, which is chambered out to receive the measure B and spring a. C is a guide, which is attached to the free end of the spring a, and also to the inner end of the measure B." "An index, b, is attached to the guide C, and slides in a slot, c, in the handle of the stretcher. A scale, d, representing the different sizes of gloves, is laid off on each side of the slot c."
4

Build the measuring handle and measure hands

**Handle.** Cut 25 cm of 10 mm aluminium tube. Saw a slot 12 cm long down one side with the hacksaw and file it smooth. **Spring and guide.** Hook an extension spring to a pin through the tube's closed end. Hook the spring's free end to a short dowel that slides inside the tube as the guide, and screw a small screw through the slot into the guide as the index. **Loop.** Cut a strip of leather 1 cm wide and 30 cm long, fix one end to the guide, and bring it out through the tube's open end as a loop with its other end fixed to the tube's outside. **Scale.** Wrap the tape measure round a series of dowels and jars of known circumference, put the loop round each and mark where the index stands. Draw the scale beside the slot. **Test.** Measure round five people's knuckles with the loop and with the tape measure, and measure each hand's width and thickness with the caliper. Compare with the notebook.

Materialien für diesen Schritt:

AluminiumrohrAluminiumrohr0.25 Meter
ZugfederZugfeder1 Stück
HartholzdübelHartholzdübel0.05 Meter
LederLeder1 Stück
HolzschraubenHolzschrauben2 Stück
KartonKarton1 Stück

Benötigte Werkzeuge:

Bügelsäge (Metallsäge)Bügelsäge (Metallsäge)
Feilen (Handfeile)Feilen (Handfeile)
AkkubohrschrauberAkkubohrschrauber
BohrersatzBohrersatz
BastelmesserBastelmesser
Schraubendreher-SatzSchraubendreher-Satz
Bandmaß (Rollmeter)Bandmaß (Rollmeter)
Digitaler Messschieber 6 ZollDigitaler Messschieber 6 Zoll
BleistiftBleistift
MalerkreppMalerkrepp
5

A measure that sticks, stretches or reads wrong

Loop-measure glove stretcher troubleshooting.

Flow

Loading...
6

History and honest limits

**Moses Greensfelder** of Harrisburg, Dauphin County, Pennsylvania, filed US 181,671 on 12 June 1876; it is dated 29 August 1876. His loop was of leather or other pliable material, the stretcher could be of wood, horn, rubber, ivory or metal, and the scale could go on the loop instead of the handle. Eight years later Augustus Traver chose a rigid measure over this flexible loop. **Honest limits.** An aluminium tube, an extension spring and a leather strip stand in for his chambered jaw, spring and loop, and no historical glove-size scale is given: the scale is marked by test. The notebook treats the hand as an ellipse; its sizes are examples. Your measurements are the result.

Materialien

6
  • 0.25 Meter
    Platzhalter
  • 1 Stück
    Platzhalter
  • 0.05 Meter
    Platzhalter
  • 1 Stück
    Platzhalter
  • Platzhalter
  • 1 Stück
    Platzhalter

Benötigte Werkzeuge

10

CC0 Gemeinfrei

Dieser Blueprint ist unter CC0 veröffentlicht. Sie dürfen dieses Werk für jeden Zweck frei kopieren, ändern, verbreiten und verwenden, ohne um Erlaubnis zu fragen.

Unterstützen Sie den Maker, indem Sie Produkte über seinen Blueprint kaufen, wo er eine Maker-Provision von Anbietern festgelegt, verdient. Oder erstellen Sie eine neue Iteration dieses Blueprints und verbinden Sie ihn in Ihrem eigenen Blueprint, um Einnahmen zu teilen.

Diskussion

(0)

Anmelden um an der Diskussion teilzunehmen

Kommentare werden geladen...