KUNST
SCHÖNHEIT & WELLNESS
HANDWERK
KULTUR & GESCHICHTE
UNTERHALTUNG
UMFELD
ESSEN & GETRÄNKE
REVERSE ENGINEERING
WISSENSCHAFTEN
SPORT
TECHNOLOGIE
WEARABLES
The States of Clay: Five Conditions, and What Each One Will Let You Do
Clay

Erstellt von

Clay

24. September 2026DK
36
0
0
0
0

The States of Clay: Five Conditions, and What Each One Will Let You Do

Clay is not one material. It passes through five distinct conditions on its way to being a pot, and each one allows some operations and forbids others — so almost every question in pottery begins with "what state is it in?" SLIP is liquid, for joining and decorating. PLASTIC is workable, for forming. LEATHER-HARD holds its shape but can still be cut, for trimming and handles. BONE DRY is brittle and can only be fired. FIRED is permanent and nothing can be undone. The transitions are one-way in the sense that matters: the first four can be reversed with water, and the fifth cannot be reversed at all. Everything before the kiln is recoverable, and that is worth knowing while learning.
Anfänger
3 hours

Anweisungen

1

What each state is for

PLASTIC clay takes a shape and holds it. Throwing, pinching, coiling and slab building all happen here, and so does joining — the clay is wet enough that two pieces scored and slipped together actually knit. LEATHER-HARD is the state people underuse. It is firm enough to pick up and turn over, soft enough to carve, trim and cut cleanly. Handles are attached here, feet are trimmed here, and carved decoration is done here because it does not smear. BONE DRY is pale, cool to the touch, and extremely fragile. Nothing can be done except sponging the sharpest edges and loading the kiln. Clay that still feels COLD against your cheek is not bone dry, however dry it looks — and firing it wet is the other way pots explode.

Materialien für diesen Schritt:

TonTon2 kg
WasserWasser1 Liter

Benötigte Werkzeuge:

Modellierwerkzeug-SatzModellierwerkzeug-Satz
Drehschlinge aus HolzDrehschlinge aus Holz
SchwammSchwamm
2

Shrinkage: how much smaller it gets, and when

Jupyter-Notebook wird geladen …

Materialien für diesen Schritt:

TonTon1 kg
Irdenware-TonIrdenware-Ton1 kg

Benötigte Werkzeuge:

LinealLineal
Digitaler Messschieber 6 ZollDigitaler Messschieber 6 Zoll
Desktop-ComputerDesktop-Computer
Modellierwerkzeug-SatzModellierwerkzeug-Satz
3

Slow the drying down, and slow the edges down most

A pot dries from the outside in and from the rim down, because those parts are most exposed. Thin rims, handles and feet dry first, shrink first, and are held back by the wetter body they are attached to — which is exactly how cracks start. So cover the work loosely with plastic and let it dry SLOWLY and evenly. A day or two under plastic, then a day in the open, beats a morning in a draught every time. Cover the parts that would otherwise race ahead. A strip of plastic over just the rim, or over the handles, lets the thick body catch up — which is the same principle as the thin-bits-burn-first problem in the forge.

Materialien für diesen Schritt:

TonTon1 kg

Benötigte Werkzeuge:

Arbeitstuch für die TöpfereiArbeitstuch für die Töpferei
SchwammSchwamm
4

Joining: score, slip, and only while plastic

Two pieces of clay join properly only when both are the same state and wet enough for their particles to interlock. Score both faces with cross-hatching, wet them with slip made from the SAME clay body, press together and work the seam. Slip from a different body is a common and avoidable mistake: two bodies shrink by different amounts, so the joint is pulling itself apart from the moment it dries. A handle attached to a leather-hard pot is the classic failure. The pot has done most of its drying shrinkage and the handle has not, so the handle shrinks onto a body that cannot move and cracks at the join. Attach at the same state, or bring the handle back to match.

Materialien für diesen Schritt:

TonTon1 kg
WasserWasser1 Liter

Benötigte Werkzeuge:

Aufrauwerkzeug für TonAufrauwerkzeug für Ton
Modellierwerkzeug-SatzModellierwerkzeug-Satz
SchwammSchwamm

Materialien

3
  • 5 kg
    Platzhalter
  • 2 Liter
    Platzhalter
  • Platzhalter

Benötigte Werkzeuge

8

CC0 Gemeinfrei

Dieser Blueprint ist unter CC0 veröffentlicht. Sie dürfen dieses Werk für jeden Zweck frei kopieren, ändern, verbreiten und verwenden, ohne um Erlaubnis zu fragen.

Unterstützen Sie den Maker, indem Sie Produkte über seinen Blueprint kaufen, wo er eine Maker-Provision von Anbietern festgelegt, verdient. Oder erstellen Sie eine neue Iteration dieses Blueprints und verbinden Sie ihn in Ihrem eigenen Blueprint, um Einnahmen zu teilen.

Diskussion

(0)

Anmelden um an der Diskussion teilzunehmen

Kommentare werden geladen...