KUNST
SCHÖNHEIT & WELLNESS
HANDWERK
KULTUR & GESCHICHTE
UNTERHALTUNG
UMFELD
ESSEN & GETRÄNKE
REVERSE ENGINEERING
WISSENSCHAFTEN
SPORT
TECHNOLOGIE
WEARABLES

Tracing Paper: Flax Tow Beaten to a Clear Pulp, Ure 1839
Tracing paper is paper you can see through. Andrew Ure (1839) says the best, sometimes called vegetable paper, is made from the refuse of the flax mills, the tow, beaten without fermenting into a semi-transparent paste that dries into a transparent sheet.
The picture: the vat room of an 18th-century paper mill, the vatman forming a sheet and the press behind (Diderot's Encyclopédie).
Fortgeschritten
Two days
Anweisungen
1
1
Cut and soak the tow
Cut and soak the tow
Cut flax tow into short lengths and soak it in clean water. Do not let it ferment (Ure).
Materialien für diesen Schritt:
Flachswerg500 g
Wasser20 LiterBenötigte Werkzeuge:
Kraftblechschere
Bütte2
2
Beat to a clear pulp
Beat to a clear pulp
Beat the wet tow for much longer than for ordinary paper, until it forms a semi-transparent paste (Ure). Ure's mills used the beating engine; by hand it takes hours.
Benötigte Werkzeuge:
Holzhammer (Klüpfel)
Bütte3
3
Form the sheets
Form the sheets
Dilute the pulp in the vat and form thin, even sheets on the mould, couching them onto felts as for rag paper.
Benötigte Werkzeuge:
Schöpfrahmen und Deckelrahmen
Wollfilzplatte
Bütte4
4
Press and dry with care
Press and dry with care
Press the stack, then dry each sheet in the press between sheets of blotting paper, changing them several times so the thin sheets do not crease, as Ure describes for bank-note paper of the same stuff.
Benötigte Werkzeuge:
Flache Pressbretter (Paar)
Löschpapier
Papierpresse (Buchform)Benötigte Werkzeuge
8- Platzhalter
- Platzhalter
- Platzhalter
- Platzhalter
- Platzhalter
- Platzhalter
- Platzhalter
- Platzhalter
Dieser Bauplan stellt her
Verwandte Blueprints
Diese Blueprints teilen Wissen — Techniken, Materialien oder Prinzipien
CC0 Gemeinfrei
Dieser Blueprint ist unter CC0 veröffentlicht. Sie dürfen dieses Werk für jeden Zweck frei kopieren, ändern, verbreiten und verwenden, ohne um Erlaubnis zu fragen.
Unterstützen Sie den Maker, indem Sie Produkte über seinen Blueprint kaufen, wo er eine Maker-Provision von Anbietern festgelegt, verdient. Oder erstellen Sie eine neue Iteration dieses Blueprints und verbinden Sie ihn in Ihrem eigenen Blueprint, um Einnahmen zu teilen.


