KUNST
SCHÖNHEIT & WELLNESS
HANDWERK
KULTUR & GESCHICHTE
UNTERHALTUNG
UMFELD
ESSEN & GETRÄNKE
REVERSE ENGINEERING
WISSENSCHAFTEN
SPORT
TECHNOLOGIE
WEARABLES
Harvesting and Processing Rooibos — Cederberg Mountains, Western Cape
English
SawubonaSipho

Erstellt von

SawubonaSipho

23. April 2026ZA
48
0
0
0
0

Harvesting and Processing Rooibos — Cederberg Mountains, Western Cape

Guide to harvesting and processing rooibos tea (Aspalathus linearis) from the Cederberg Mountains in the Western Cape of South Africa — the only place in the world where rooibos grows naturally.
Fortgeschritten

Anweisungen

1

Understanding the Rooibos Plant

Rooibos (Aspalathus linearis) is not a tea — it is a small shrub in the Fabaceae (legume) family. It grows only in the Cederberg region of the Western Cape, South Africa, where acidic sandy soil (pH 3.5-5.0) and 250-600 mm annual rainfall create suitable conditions. The plant reaches 1-2 meters in height and lives for 5-8 harvesting years. Its leaves are small and needle-like, approximately 10-40 mm long. Rooibos contains aspalathin, an anti-inflammatory compound found in no other plant on earth.
2

Checking Harvest Readiness

Harvest season runs from January to March — Southern Hemisphere summer. Plants are ready when new shoots have grown sufficiently and leaves have good moisture content. Plants must be at least 18 months old before the first harvest. Leaves should be dark green and firmly attached to the branch. If the soil is too dry from drought, wait for rain before harvesting — harvesting during drought kills the plant.
3

Cutting Branches with a Sickle

Cut rooibos branches with a sharp sickle, leaving approximately 30 cm above the ground. This is critically important — cutting below this level kills the plant because it cannot regrow. A healthy plant will produce new branches from the remaining stumps and be ready for re-harvest in 6-8 months. Gather cut branches into bundles of 5-8 kg for easy transport.

Materialien für diesen Schritt:

Mature Rooibos BranchesMature Rooibos Branches50 kg

Benötigte Werkzeuge:

Harvesting SickleHarvesting Sickle
Leather Work GlovesLeather Work Gloves
4

Transporting Bundles to the Processing Area

Carry branch bundles to the cutting area — a flat shaded place near the drying court. Branches must be processed on the same day as harvesting. Delay causes rotting and mold growth that creates an unpleasant taste and darkened color. Place bundles on boards or tarpaulin, not directly on the ground, to avoid soil contamination.

Benötigte Werkzeuge:

Polyethylene TarpaulinPolyethylene Tarpaulin
5

Cutting Branches into Small Pieces

Cut rooibos branches into small pieces of 3-5 mm length using a mechanical chopper or sickle. Piece size is important — pieces too large do not ferment properly, while pieces too small become dust. A mechanical chopper has sharp blades spinning at 1,500-3,000 rpm. When cutting by hand, ensure all pieces are uniform in size. Leaves and leaf fragments should be mixed with the cut branches.

Benötigte Werkzeuge:

Mechanical Tea ChopperMechanical Tea Chopper
Sharpening StoneSharpening Stone
6

Bruising the Pieces to Start Oxidation

Cut pieces must be bruised to start the oxidation (fermentation) process. Crush pieces using a roller mill or by hand — this breaks cell walls in the leaves, releasing enzymes and polyphenols needed for oxidation to begin. You will notice the pieces becoming moist and releasing a pleasant, bright aroma. This step determines the final color and flavor profile of the rooibos.

Benötigte Werkzeuge:

Bruising Roller MillBruising Roller Mill
7

Incubation — The Fermentation Process

Pile the bruised pieces into a heap indoors, approximately 20-30 cm high. Sprinkle a small amount of water to maintain moisture — pieces should be damp but not soaking. Cover the heap with a tarpaulin to retain heat and moisture. Fermentation (oxidation) takes 8-12 hours. During this time, leaf polyphenols oxidize enzymatically, changing the color from green to reddish-brown — the characteristic rooibos color. Heap temperature rises to 38-42 degrees Celsius. If temperature exceeds 50 degrees Celsius, uncover the tarpaulin to cool.

Materialien für diesen Schritt:

Distilled Water (1 Liter)Distilled Water (1 Liter)20 Liter

Benötigte Werkzeuge:

Polyethylene TarpaulinPolyethylene Tarpaulin
Probe ThermometerProbe Thermometer
8

Spreading on the Drying Court

After 8-12 hours of fermentation, spread the rooibos pieces evenly on the drying court — a flat concrete or stone surface raised above the ground. Spread in a thin layer less than 5 cm thick. Use a rake to distribute evenly. The rooibos must face direct sunlight. Turn pieces every 2-3 hours for even drying. Drying takes 1-3 hours in South African summer sun.

Benötigte Werkzeuge:

Concrete Drying CourtConcrete Drying Court
Garden RakeGarden Rake
9

Checking for Dryness

Dried rooibos should have less than 10% moisture. Test by taking a handful and squeezing — it should break with a crisp sound, not bend or flex. If it still bends, more drying time is needed. Color should be an even reddish-brown, like cinnamon bark. Green or white pieces indicate incomplete fermentation. The aroma should be pleasant and sweet — between honeyed and woody.
10

Sieving and Grading

Pass dried rooibos through multiple sieves to separate pieces by size and remove foreign matter (small stones, uncut woody pieces, insects). First sieve (5 mm mesh) removes large pieces. Second sieve (2 mm) separates premium-grade rooibos. Third sieve (1 mm) collects fine dust. Low-grade fine dust can be sold as grinding-grade rooibos or used in tea bag blends.

Benötigte Werkzeuge:

Vibrating Sieve (5mm mesh)Vibrating Sieve (5mm mesh)
Vibrating Sieve (2mm mesh)Vibrating Sieve (2mm mesh)
Vibrating Sieve (1mm mesh)Vibrating Sieve (1mm mesh)
11

Steam Pasteurization

Sieved rooibos is steam-pasteurized to kill bacteria and mold. Pass rooibos through a steam chamber at 100 degrees Celsius for 30-60 seconds. This is sufficient to kill coliforms and Salmonella without altering the aroma profile. After steam pasteurization, re-dry the rooibos until moisture is below 8% to prevent mold during storage. This step is required for rooibos to meet South African and international food safety standards.

Benötigte Werkzeuge:

Steam Pasteurization ChamberSteam Pasteurization Chamber
Moisture MeterMoisture Meter
12

Grading and Packaging

Rooibos is graded by piece size and condition. Super Grade has fine, even, reddish-brown pieces of uniform size — sold as loose leaf tea. Lower grades are used in tea bags. Finished rooibos standards: fine dust below 4%, moisture below 8%, coliforms below 10 CFU/g. Package in foil-lined kraft paper bags to protect against moisture, light, and air. Store in a cool, dry place. Properly packaged rooibos maintains quality for 2-3 years without degradation.

Materialien für diesen Schritt:

Foil-Lined Kraft Paper BagFoil-Lined Kraft Paper Bag20 Stück
Adhesive Seal LabelsAdhesive Seal Labels20 Stück

Benötigte Werkzeuge:

Bag Heat SealerBag Heat Sealer
Digital Kitchen ScaleDigital Kitchen Scale

Materialien

4

Benötigte Werkzeuge

16

CC0 Gemeinfrei

Dieser Blueprint ist unter CC0 veröffentlicht. Sie dürfen dieses Werk für jeden Zweck frei kopieren, ändern, verbreiten und verwenden, ohne um Erlaubnis zu fragen.

Unterstützen Sie den Maker, indem Sie Produkte über seinen Blueprint kaufen, wo er eine Maker-Provision von Anbietern festgelegt, verdient. Oder erstellen Sie eine neue Iteration dieses Blueprints und verbinden Sie ihn in Ihrem eigenen Blueprint, um Einnahmen zu teilen.

Diskussion

(0)

Anmelden um an der Diskussion teilzunehmen

Kommentare werden geladen...