KUNST
SCHÖNHEIT & WELLNESS
HANDWERK
KULTUR & GESCHICHTE
UNTERHALTUNG
UMFELD
ESSEN & GETRÄNKE
REVERSE ENGINEERING
WISSENSCHAFTEN
SPORT
TECHNOLOGIE
WEARABLES

Wool Cloth Woven in Plain Weave on a Rigid Heddle Loom
Plain weave is the most basic weave: each weft thread goes over one warp thread and under the next. Woven from undyed wool yarn, the cloth comes off the loom loose and soft, still oily and unshrunk; fulling cleans and thickens it afterwards.
The picture: plain weave seen close up.
Anfänger
A few days
Anweisungen
1
1
Warp the loom
Warp the loom
Measure the warp (step 5), tie it to the front roller, and thread one end through each slot and each hole of the heddle. Wind it on the back roller under even tension.
Materialien für diesen Schritt:
Kettgarn320 mBenötigte Werkzeuge:
Webrahmen mit Kammlitze
Lineal
Schraubzwinge in C-Form
Schere2
2
Weave
Weave
Lift the heddle, pass the shuttle through, lower the heddle and pass it back, beating each pick in lightly with the heddle. Lay the weft in at a slant so the edges do not draw in.
Materialien für diesen Schritt:
Schussgarn265 mBenötigte Werkzeuge:
Webrahmen mit Kammlitze
Weberschiffchen3
3
Advance and keep going
Advance and keep going
Wind the woven cloth onto the front roller as you go, keeping the beat even so the cloth has the same number of picks per cm all along.
Benötigte Werkzeuge:
Webrahmen mit Kammlitze
Lineal4
4
Cut off
Cut off
Weave to the end of the warp, cut the cloth off, and knot the warp ends in groups so the weft cannot unravel. It is now loom-state cloth, ready for fulling.
Benötigte Werkzeuge:
Schere5
5
Yarn for the cloth
Yarn for the cloth
Jupyter-Notebook wird geladen …
Dieser Bauplan stellt her
Verwandte Blueprints
Diese Blueprints teilen Wissen — Techniken, Materialien oder Prinzipien
CC0 Gemeinfrei
Dieser Blueprint ist unter CC0 veröffentlicht. Sie dürfen dieses Werk für jeden Zweck frei kopieren, ändern, verbreiten und verwenden, ohne um Erlaubnis zu fragen.
Unterstützen Sie den Maker, indem Sie Produkte über seinen Blueprint kaufen, wo er eine Maker-Provision von Anbietern festgelegt, verdient. Oder erstellen Sie eine neue Iteration dieses Blueprints und verbinden Sie ihn in Ihrem eigenen Blueprint, um Einnahmen zu teilen.




