Blueprint NFTs
Automobil & Fahrzeuge
Biologie
Bücher
Chemie
Computerressourcen
Elektronik
Energie- und Stromversorgungssysteme
Verbindungselemente und Hardware
Zuhause & Leben
Hydraulik und Pneumatik
Industrie und Fertigung
Kinder & Baby
Laborausrüstung
Maschinen
Herstellung von Verbrauchsmaterialien
Mechanische Komponenten
Messtechnik und Kalibrierung
Outdoor & Garten
Haustiere und Tiere
Rohstoffe
Sicherheitsausrüstung
Ladenbedarf
Werkzeuge und Zubehör
Werkzeuge
Werkstatt-Infrastruktur
Produktbild 1

Stepper Motor Threaded Shaft - 29 oz.in (200 steps/rev)

These steppers have a threaded shaft, which allows them to be used as a linear actuator.
As the motor runs, it moves along the shaft at a specific rate of 1cm per 5 full rotations.
These are a good choice for linear motion where precision and repeatability are important.

Note: It looks like the datasheet for this stepper may not be accurate. When connecting this motor to a bi-polar driver you'll want to wire it according to the wiring diagram in the documents below.

Features:

  • Step Distance: 0.01mm
  • 2-Phase
  • Rated Voltage: 12V
  • Rated Current: 0.4A/Phase
  • 100mm Long Threaded Shaft (keyed on one end)
  • Holding Torque: 21 N.cm
  • 6-Pin Wiring Harness Included

Documents:

  • Datasheet
  • Wiring Diagram
Verkauft von
Maker-Provision: 10%

Blueprint-Ersteller verdienen diesen Prozentsatz, wenn Kunden über ihre Blueprints einkaufen

€23
Stepper Motor Threaded Shaft - 29 oz.in (200 steps/rev)—
€23
Baupläne werden geladen...
Stepper Motor Threaded Shaft - 29 oz.in (200 steps/rev) | Youblob