ART
BEAUTY & WELLNESS
CRAFT
CULTURE & HISTORY
ENTERTAINMENT
ENVIRONMENT
FOOD & DRINKS
REVERSE ENGINEERING
SCIENCES
SPORTS
TECHNOLOGY
WEARABLES
Iron Trip-Hammer Head: Faggot-Welded Block with a Helve Eye
Forge

Created by

Forge

17. October 2026NO
2
0
0
0
0

Iron Trip-Hammer Head: Faggot-Welded Block with a Helve Eye

A trip hammer's head sits on the end of a wooden helve; its weight, falling, makes the blow. Old tilt-hammer heads stayed at about 50 kg or less. Build a smaller one from wrought-iron bars welded into a block, then punch and drift an eye for the helve. The picture: our diagram of the head on its helve over the anvil.
Advanced
Two days with a striker

Instructions

1

Make the faggot

Cut wrought-iron bars to the block length and bind them in a tight square bundle with iron rod, one bar left long as a handle.

Materials for this step:

Wrought Iron BarWrought Iron Bar16 kg
Wrought Iron RodWrought Iron Rod1 m

Tools needed:

AnvilAnvil
Blacksmith HammerBlacksmith Hammer
Blacksmith TongsBlacksmith Tongs
Welding GlovesWelding Gloves
Safety GlassesSafety Glasses
Leather ApronLeather Apron
2

Weld the block

Bring the bundle to a welding heat, sprinkle it with sand, and with a striker on the sledge weld it solid, closing every seam. Take several heats, working each face in turn.

Tools needed:

Blacksmith ForgeBlacksmith Forge
CharcoalCharcoal
Fine SandFine Sand
SledgehammerSledgehammer
Blacksmith HammerBlacksmith Hammer
Blacksmith TongsBlacksmith Tongs
AnvilAnvil
Welding GlovesWelding Gloves
Safety GlassesSafety Glasses
Leather ApronLeather Apron
3

Square it

Cut off the handle bar and dress the block square with the flatter, faces flat and the striking face slightly crowned.

Tools needed:

Blacksmith ForgeBlacksmith Forge
FlatterFlatter
SledgehammerSledgehammer
Blacksmith TongsBlacksmith Tongs
AnvilAnvil
Welding GlovesWelding Gloves
Safety GlassesSafety Glasses
Leather ApronLeather Apron
4

Punch the eye

At a full heat punch through the side, halfway from each face, then drift the hole out to the helve's size.

Tools needed:

Blacksmith ForgeBlacksmith Forge
Hot PunchHot Punch
DriftDrift
SledgehammerSledgehammer
Blacksmith TongsBlacksmith Tongs
AnvilAnvil
Welding GlovesWelding Gloves
Safety GlassesSafety Glasses
Leather ApronLeather Apron
5

Size the block for your mass

Loading Jupyter Notebook...

Materials

2

Tools Required

13

CC0 Public Domain

This blueprint is released under CC0. You are free to copy, modify, distribute, and use this work for any purpose, without asking permission.

Support the Maker by purchasing products through their Blueprint where they earn a Maker Commission set by Vendors, or create a new iteration of this Blueprint and include it as a connection in your own Blueprint to share revenue.

Discussion

(0)

Log in to join the discussion

Loading comments...