ARTE
BELLEZA Y BIENESTAR
ARTESANÍA
CULTURA E HISTORIA
ENTRETENIMIENTO
MEDIO AMBIENTE
COMIDA Y BEBIDAS
INGENIERÍA INVERSA
CIENCIAS
DEPORTES
TECNOLOGÍA
TECNOLOGÍA VESTIBLE
Abaca Fibre: Leaf Sheaths Tuxied and Hand-Stripped
Tex

Creado por

Tex

14. octubre 2026FO
6
0
0
0
0

Abaca Fibre: Leaf Sheaths Tuxied and Hand-Stripped

Abaca, Manila hemp, is the fibre in the leaf sheaths of Musa textilis, a banana relative from the Philippines; it makes Manila rope, coarse twine and strong papers. Cut the stalk after flowering, peel the outer sheath layers away (tuxying), strip the fibre by hand with a knife and dry it in the sun. The picture: pulling abaca strips under a knife at the harvest site.
Principiante
Two days

Instrucciones

1

Cut the stalk

After the plant has flowered and before fruit forms, cut the stalk near the ground and take off the leaves.

Materiales para este paso:

Tallo de abacá maduro (de 18 a 24 meses)Tallo de abacá maduro (de 18 a 24 meses)60 kg

Herramientas necesarias:

BoloBolo
Guantes de trabajo de cueroGuantes de trabajo de cuero
2

Tuxy

Loosen the leaf sheaths one by one and peel the outer, fibre-bearing layer (the tuxy) away from the soft inner layer.

Herramientas necesarias:

Cuchillo de cocinaCuchillo de cocina
3

Strip

Lay each tuxy on a board, press a knife down on it and pull the strip through under the blade, scraping the pulp away and leaving the fibre.

Herramientas necesarias:

Cuchillo de cocinaCuchillo de cocina
Bloque de madera duraBloque de madera dura
Guantes de trabajo de cueroGuantes de trabajo de cuero
4

Dry and bundle

Hang the fibre on a rack in the sun until dry, then tie it in bundles and weigh it.

Herramientas necesarias:

Secadero de bambúSecadero de bambú
CordeleríaCordelería
Balanza de platillosBalanza de platillos
5

Fibre from your stalks

Cargando el cuaderno de Jupyter…

Materiales

1

Herramientas requeridas

7

Blueprints relacionados

Estos blueprints comparten conocimiento — técnicas, materiales o principios

CC0 Dominio público

Este Blueprint se publica bajo CC0. Eres libre de copiar, modificar, distribuir y usar este trabajo para cualquier propósito, sin pedir permiso.

Apoya al Maker comprando productos a través de su Blueprint, donde gana una Comisión del Maker establecida por los vendedores, o crea una nueva iteración de este Blueprint e inclúyela como conexión en tu propio Blueprint para compartir ingresos.

Discusión

(0)

Iniciar sesión para unirte a la discusión

Cargando comentarios...