ARTE
BELLEZA Y BIENESTAR
ARTESANÍA
CULTURA E HISTORIA
ENTRETENIMIENTO
MEDIO AMBIENTE
COMIDA Y BEBIDAS
INGENIERÍA INVERSA
CIENCIAS
DEPORTES
TECNOLOGÍA
TECNOLOGÍA VESTIBLE
Braided Cotton Wick, Soaked in Borax and Salt
Tex

Creado por

Tex

14. octubre 2026FO
9
0
0
0
0

Braided Cotton Wick, Soaked in Borax and Salt

A wick is usually braided cotton. It draws the melted wax or oil up to the flame. Braided flat, it curls over into the flame as it burns and trims itself. Wicks are soaked in borax and salt dissolved in water. Braid three strands of cotton thread, soak the braid and dry it. The picture: a wick standing from a candle, its tip curled over.
Principiante
A day, mostly drying

Instrucciones

1

Make three strands

Cut cotton thread into equal lengths a little longer than the wick you want, and group them into three equal strands (step 5).

Materiales para este paso:

Hilo de algodónHilo de algodón30 m

Herramientas necesarias:

TijerasTijeras
ReglaRegla
2

Braid flat

Clamp the ends and plait the three strands firmly and evenly, keeping the braid flat. Tie off the end.

Herramientas necesarias:

Gato de tornillo en CGato de tornillo en C
3

Soak

Dissolve a tablespoon of borax and a tablespoon of salt in a cup of warm water, and soak the braid in it for a few hours.

Materiales para este paso:

AguaAgua0.25 litro
Bórax en polvoBórax en polvo15 g
SalSal15 g

Herramientas necesarias:

Balanza de platillosBalanza de platillos
Tarro de vidrioTarro de vidrio
4

Dry

Hang it straight on the rack until fully dry. Cut it to length for candles, or leave it long for a lamp.

Herramientas necesarias:

SecaderoSecadero
TijerasTijeras
5

Thread needed

Cargando el cuaderno de Jupyter…

Materiales

4
  • Marcador de posición
  • 0.25 litro
    Marcador de posición
  • Marcador de posición
  • 15 g
    Marcador de posición

Herramientas requeridas

6

CC0 Dominio público

Este Blueprint se publica bajo CC0. Eres libre de copiar, modificar, distribuir y usar este trabajo para cualquier propósito, sin pedir permiso.

Apoya al Maker comprando productos a través de su Blueprint, donde gana una Comisión del Maker establecida por los vendedores, o crea una nueva iteración de este Blueprint e inclúyela como conexión en tu propio Blueprint para compartir ingresos.

Discusión

(0)

Iniciar sesión para unirte a la discusión

Cargando comentarios...