Colaboración
ARTE
BELLEZA Y BIENESTAR
ARTESANÍA
CULTURA E HISTORIA
ENTRETENIMIENTO
MEDIO AMBIENTE
COMIDA Y BEBIDAS
INGENIERÍA INVERSA
CIENCIAS
DEPORTES
TECNOLOGÍA
TECNOLOGÍA VESTIBLE
The Revolver: Several Chambers Turning Behind One Barrel (Colt, 1836 and 1839) - History and How It Works
Charlie

Creado por

Charlie

13. noviembre 2026DE
2
0
0
0
0

The Revolver: Several Chambers Turning Behind One Barrel (Colt, 1836 and 1839) - History and How It Works

Principiante
About 15 minutes

Instrucciones

1

Read Colt's 1839 patent

"Be it known that I, Samuel Colt, of Paterson, in the county of Passaic and State of New Jersey, did obtain Letters Patent of the United States for an Improvement in Fire Arms, which Letters Patent bear date on the 25th day of February, in the year 1836." (US 1,304, dated 29 August 1839.)
2

The problem it solved

A muzzle-loading gun had to be loaded down the barrel after every shot. Colt kept one barrel and put the several charges in a separate turning part behind it, which his patent calls the receiver.
3

How it works, in principle

The receiver is bored with several chambers and turns on a central arbor. Each chamber holds its own charge and has its own percussion cap at the back. Working the lock turns the receiver so the next chamber comes into line with the barrel and holds it there; the hammer then fires that chamber only. His 1839 patent also covers a lever rammer fixed under the barrel, a groove to carry smoke away from the arbor, and a magazine primer for caps.
4

Why it mattered

Several shots from one hand-held arm, without reloading between them, changed what one person could do. Colt's plan of one barrel with a turning chambered cylinder remains the basic plan of the revolver.
5

Honest limits

From the text of US 1,304 (1839), which refers back to Colt's patent of 25 February 1836 (issued before the US numbering began). This page describes how the mechanism works in general terms only; it gives no dimensions, materials, charges or making steps, by design.

CC0 Dominio público

Este Blueprint se publica bajo CC0. Eres libre de copiar, modificar, distribuir y usar este trabajo para cualquier propósito, sin pedir permiso.

Apoya al Maker comprando productos a través de su Blueprint, donde gana una Comisión del Maker establecida por los vendedores, o crea una nueva iteración de este Blueprint e inclúyela como conexión en tu propio Blueprint para compartir ingresos.

Discusión

(0)

Iniciar sesión para unirte a la discusión

Cargando comentarios...