Colaboración
ARTE
BELLEZA Y BIENESTAR
ARTESANÍA
CULTURA E HISTORIA
ENTRETENIMIENTO
MEDIO AMBIENTE
COMIDA Y BEBIDAS
INGENIERÍA INVERSA
CIENCIAS
DEPORTES
TECNOLOGÍA
TECNOLOGÍA VESTIBLE
Claw Crowbar: a Round Iron Bar with Steeled Chisel Ends, One Split Hot and Bent into a Claw (Edwinson, 1886)
Forge

Creado por

Forge

14. noviembre 2026NO
4
0
0
0
0

Claw Crowbar: a Round Iron Bar with Steeled Chisel Ends, One Split Hot and Bent into a Claw (Edwinson, 1886)

The builder's and fencer's crowbar from George Edwinson's smithing series (Amateur Work, 1886): a round iron bar 2 to 5 ft long with steel-pointed ends, one forged to a chisel, the other split hot into a fork and bent over into a nail-drawing claw, tempered purple.
Intermedio
Half a day at the forge

Instrucciones

1

His sizes

Cargando el cuaderno de Jupyter…
2

Read Edwinson

"It is an ordinary round bar of iron with steel-pointed ends."
3

Choose the bar

Take round bar iron of 1, 1 1/4 or 1 1/2 in (25, 32 or 38 mm), 2 to 5 ft (0.6-1.5 m) long. A bar of best tool steel may be lighter.

Materiales para este paso:

Barra de hierro forjadoBarra de hierro forjado1 pieza

Herramientas necesarias:

Tajadera en calienteTajadera en caliente
4

Steel the ends (ours, after his pick method)

Split each end hot, weld a steel wedge into the cleft under borax and draw it out, as for a pick point.

Materiales para este paso:

Acero al crisolAcero al crisol1 pieza
Bórax en polvoBórax en polvo1 pieza

Herramientas necesarias:

Fragua de herreroFragua de herrero
Tajadera en calienteTajadera en caliente
YunqueYunque
Mazo pesadoMazo pesado
Tenazas de herreroTenazas de herrero
5

Forge the chisel end

Forge one end to a chisel shape. Keep the steel no hotter than red and hammer it lightly at that heat.

Herramientas necesarias:

Fragua de herreroFragua de herrero
YunqueYunque
MartilloMartillo
Tenazas de herreroTenazas de herrero
6

Forge the claw

Forge the other end to a chisel shape too, split it hot into a fork with the hot chisel, and bend the fork over to form the claw. For a quarryman's bar leave out the claw and bend one chisel end over as a short lever.

Herramientas necesarias:

Fragua de herreroFragua de herrero
Tajadera en calienteTajadera en caliente
YunqueYunque
MartilloMartillo
Tenazas de herreroTenazas de herrero
7

Harden and temper

Harden the steeled ends and temper them to a purple, the best tint for crowbars.

Herramientas necesarias:

Fragua de herreroFragua de herrero
Cubo de templeCubo de temple
8

Troubleshooting

Crowbar troubleshooting.

Flow

Loading...
9

History and honest limits

From George Edwinson, "Smithing and Forging" (part X), **Amateur Work, Illustrated**, vol. VI (Ward, Lock & Co., 1886-87), pp. 211-214 (checked on the archive.org scan amateurworkillus06lond), p. 212 and fig. 220. The steel wedges follow his pick method; the metric figures and tools are ours.

Materiales

3

Herramientas requeridas

7

CC0 Dominio público

Este Blueprint se publica bajo CC0. Eres libre de copiar, modificar, distribuir y usar este trabajo para cualquier propósito, sin pedir permiso.

Apoya al Maker comprando productos a través de su Blueprint, donde gana una Comisión del Maker establecida por los vendedores, o crea una nueva iteración de este Blueprint e inclúyela como conexión en tu propio Blueprint para compartir ingresos.

Discusión

(0)

Iniciar sesión para unirte a la discusión

Cargando comentarios...