Colaboración
ARTE
BELLEZA Y BIENESTAR
ARTESANÍA
CULTURA E HISTORIA
ENTRETENIMIENTO
MEDIO AMBIENTE
COMIDA Y BEBIDAS
INGENIERÍA INVERSA
CIENCIAS
DEPORTES
TECNOLOGÍA
TECNOLOGÍA VESTIBLE
Coppice Wood for Poles, Billets and Faggots (Evelyn's Sylva, 1706)
Karen

Creado por

Karen

14. noviembre 2026SE
0
0
0
0
0

Coppice Wood for Poles, Billets and Faggots (Evelyn's Sylva, 1706)

John Evelyn's coppice husbandry: hazel, ash, chestnut and willow planted close and cut back to the stool every 8 to 20 years, so each fell gives poles, statute billets and faggots, while the best saplings are left to grow on as timber.
Intermedio
Rotations of 8 to 20 years; a winter per fell

Instrucciones

1

Rotation and measures

Cargando el cuaderno de Jupyter…
2

Read Sylva

"Sylva caedua is (as Varro defines it) as well copp'ce to cut for fuel as for use of timber."
3

Lay out and plant

Lay the coppice out in parts that are cut in turn, with 18-20 ft rides of grass between them for carts, and fence it. Plant hazel or birch with ash, chestnut, sallow and sycamore mixed in (at least one in four), no closer than 5 ft; on wet ground drain it and put willow, sallow and alder low down. Or bury sets of sallow, willow or alder, a billet long with both ends sloped. Weed for two years and keep cattle out.

Materiales para este paso:

Vástago de madera duraVástago de madera dura1 pieza

Herramientas necesarias:

PalaPala
AzadaAzada
4

Choose the rotation

Cut after 8 or 9 years on very good ground, otherwise 12 to 15; 20 years is better. With a 17-year growth, a 17-acre coppice gives one acre to fell every year for ever. Shallow ground 10-12 years, deeper 14.
5

Fell the underwood

Fell from January to mid-March or April, or mid-September to near the end of November, starting from one side so carts can enter. Cut no higher than half a foot, the closer the better, slanting, smooth and sloping to the south. Of a bunch of shoots keep the fairest sapling. Leave about twelve good young oaks (or ash, elm, beech) per acre as standards, best on the edges. Keep enough poles round the bounds for the fence.

Herramientas necesarias:

HachaHacha
PodónPodón
6

Make up the wood

Sort out the straight poles. Cut billets 3 ft long and 7.5 in round, and bind the brush into round faggots a full yard long and 2 ft round. Stack cordwood 4 ft high, 4 ft broad and 8 ft long (128 cubic feet). Clear everything by Midsummer.

Materiales para este paso:

Bramante de yuteBramante de yute1 pieza

Herramientas necesarias:

HachaHacha
PodónPodón
SerruchoSerrucho
7

Close it up

Rake out spray and chips, grub out rotten stubs, fill thin places with new plants, and shut the coppice to cattle: four years if it was cut at 14 years or under, longer if older.

Materiales para este paso:

Vástago de madera duraVástago de madera dura1 pieza

Herramientas necesarias:

Rastrillo de hierroRastrillo de hierro
PalaPala
8

Troubleshooting

Coppice troubleshooting.

Flow

Loading...
9

History and honest limits

From John Evelyn, **Sylva** (text of the 1706 edition, London reprint 1908), Book III, Chap. I 'Of Copp'ces' (checked on the archive.org scan sylvaordiscourse02evelrich, pp. 1-7). The statutes he cites are 17th-century English law, given as history; metric figures are ours.

Materiales

2

Herramientas requeridas

6
  • Marcador de posición
  • Marcador de posición
  • Marcador de posición
  • Marcador de posición
  • Marcador de posición
  • Marcador de posición

Blueprints relacionados

Estos blueprints comparten conocimiento — técnicas, materiales o principios

CC0 Dominio público

Este Blueprint se publica bajo CC0. Eres libre de copiar, modificar, distribuir y usar este trabajo para cualquier propósito, sin pedir permiso.

Apoya al Maker comprando productos a través de su Blueprint, donde gana una Comisión del Maker establecida por los vendedores, o crea una nueva iteración de este Blueprint e inclúyela como conexión en tu propio Blueprint para compartir ingresos.

Discusión

(0)

Iniciar sesión para unirte a la discusión

Cargando comentarios...