ARTE
BELLEZA Y BIENESTAR
ARTESANÍA
CULTURA E HISTORIA
ENTRETENIMIENTO
MEDIO AMBIENTE
COMIDA Y BEBIDAS
INGENIERÍA INVERSA
CIENCIAS
DEPORTES
TECNOLOGÍA
TECNOLOGÍA VESTIBLE
Ferric Ammonium Citrate: Ferric Hydroxide Dissolved in Citric Acid and Ammonia
Charlie

Creado por

Charlie

18. octubre 2026DE
6
0
0
0
0

Ferric Ammonium Citrate: Ferric Hydroxide Dissolved in Citric Acid and Ammonia

Iron and ammonium citrate is the light-sensitive salt of the blueprint (cyanotype). The British Pharmacopoeia formula (US Dispensatory, 1907): throw down ferric hydroxide from ferric sulphate with ammonia, wash it, dissolve it in warm citric acid, add ammonia, and dry the syrup in thin layers below 38 °C to garnet-red scales. Keep it from light. The picture: ferric ammonium citrate (Wikimedia Commons).
Intermedio
2 days

Instrucciones

1

Make 10 % ammonia water

Mix 2 parts of strong ammonia (25-28 %) with 3 parts of water to get about 10 %. You need about 460 ml.

Materiales para este paso:

Disolución de amoníaco al 25-28 %Disolución de amoníaco al 25-28 %190 ml

Herramientas necesarias:

Agua destiladaAgua destilada
Vaso de precipitados de borosilicatoVaso de precipitados de borosilicato
Guantes de gomaGuantes de goma
2

Throw down ferric hydroxide

Mix 320 ml of the ammonia water with 800 ml of distilled water. Dilute 200 ml of ferric sulphate solution with 800 ml of distilled water and add it slowly, stirring briskly, until the mix smells faintly of ammonia. Leave 2 hours, stirring now and then.

Materiales para este paso:

Solución de sulfato férricoSolución de sulfato férrico200 ml

Herramientas necesarias:

Agua destiladaAgua destilada
Vaso de precipitados de borosilicatoVaso de precipitados de borosilicato
Varilla de vidrioVarilla de vidrio
3

Filter and wash

Pour onto a calico filter. When drained, wash the brown ferric hydroxide with distilled water until the washings are free of sulphate.

Herramientas necesarias:

Paño de algodón de filtrado gruesoPaño de algodón de filtrado grueso
Agua destiladaAgua destilada
4

Dissolve in citric acid

Dissolve 80 g of citric acid in 80 g of distilled water and warm it on a water bath. Stir in the drained hydroxide until nearly all of it has dissolved and the acid is saturated.

Materiales para este paso:

Ácido cítricoÁcido cítrico80 g

Herramientas necesarias:

Agua destiladaAgua destilada
Olla grande (inferior, para baño María)Olla grande (inferior, para baño María)
Vaso de precipitados de borosilicatoVaso de precipitados de borosilicato
Varilla de vidrioVarilla de vidrio
Balanza de platillosBalanza de platillos
5

Add ammonia and filter

Let it cool, add 110 ml of the ammonia water and filter through flannel, adding a little distilled water if needed.

Herramientas necesarias:

Franela de lana (para filtrar)Franela de lana (para filtrar)
Agua destiladaAgua destilada
6

Dry to scales

Evaporate to a syrup, keeping a very slight smell of ammonia. Spread thinly on glass plates and dry below 37.8 °C (100 °F). Lift off the flakes and keep them in a dark, closed jar.

Herramientas necesarias:

Cápsula de evaporaciónCápsula de evaporación
Olla grande (inferior, para baño María)Olla grande (inferior, para baño María)
Lámina de vidrioLámina de vidrio
TermómetroTermómetro
Tarros de vidrio oscuro con cierre herméticoTarros de vidrio oscuro con cierre hermético

Materiales

3

Herramientas requeridas

12

Blueprints relacionados

Estos blueprints comparten conocimiento — técnicas, materiales o principios

CC0 Dominio público

Este Blueprint se publica bajo CC0. Eres libre de copiar, modificar, distribuir y usar este trabajo para cualquier propósito, sin pedir permiso.

Apoya al Maker comprando productos a través de su Blueprint, donde gana una Comisión del Maker establecida por los vendedores, o crea una nueva iteración de este Blueprint e inclúyela como conexión en tu propio Blueprint para compartir ingresos.

Discusión

(0)

Iniciar sesión para unirte a la discusión

Cargando comentarios...